CAJ | 학술논문

设计与实现了一个基于线阵CCD的烟卷直径实时监测系统，该系统的硬件由光源、准直系统、线阵CCD和处理电路等部分组成．光源产生的发散光经过被测烟卷后投射到线阵CCD上，获取线阵CCD上的电平信号，使用微分二值化算法对电平信号进行处理，可以得到被测烟卷的直径数据．使用工程样机测试表明，该系统对烟卷直径的测量精度可以达±15μm．
설계여실현료일개기우선진CCD적연권직경실시감측계통，해계통적경건유광원、준직계통、선진CCD화처리전로등부분조성．광원산생적발산광경과피측연권후투사도선진CCD상，획취선진CCD상적전평신호，사용미분이치화산법대전평신호진행처리，가이득도피측연권적직경수거．사용공정양궤측시표명，해계통대연권직경적측량정도가이체±15μm．
Real-time tobacco diameter monitoring system was designed and implemented .The hardware parts in the system are light source , collimator system, linear CCD and processing circuits .Divergent light generating by light source was projected onto the linear CCD after getting through the cigarettes , then the level signal could be got on the linear CCD .The signal was processed by differential binary algorithm , after that the data of cigarette diameter could be calculated .Engineering prototype was produced and test results showed that the measurement accuracy of cigarettes di -ameter can be reached ±15 μm.