合成橡胶工业
閤成橡膠工業
합성상효공업
CHINA SYNTHETIC RUBBER INDUSTRY
2014年
4期
315-318
,共4页
方博文%康海澜%王珍%王文才%张立群
方博文%康海瀾%王珍%王文纔%張立群
방박문%강해란%왕진%왕문재%장립군
生物基聚酯弹性体%耐油性能%力学性能%复合材料
生物基聚酯彈性體%耐油性能%力學性能%複閤材料
생물기취지탄성체%내유성능%역학성능%복합재료
bio-based polyester elastomer%oil resistance%mechanical property%composite
考察了生物基聚酯弹性体/炭黑复合材料的耐油性能,并与丁腈橡胶/炭黑复合材料进行了对比。结果表明,常温下将生物基聚酯弹性体/炭黑复合材料分别浸泡在燃油( RP-3)、润滑油(4109)及液压油(YH-15)中直至溶胀,其拉伸强度保持率分别达到了86.8%,88.5%,73.0%;在100℃以下,生物基聚酯弹性体/炭黑复合材料与丁腈橡胶/炭黑复合材料在经高温RP-3燃油处理后的力学性能保持率基本持平,而在100℃以上前者的力学性能保持率则明显优于后者。
攷察瞭生物基聚酯彈性體/炭黑複閤材料的耐油性能,併與丁腈橡膠/炭黑複閤材料進行瞭對比。結果錶明,常溫下將生物基聚酯彈性體/炭黑複閤材料分彆浸泡在燃油( RP-3)、潤滑油(4109)及液壓油(YH-15)中直至溶脹,其拉伸彊度保持率分彆達到瞭86.8%,88.5%,73.0%;在100℃以下,生物基聚酯彈性體/炭黑複閤材料與丁腈橡膠/炭黑複閤材料在經高溫RP-3燃油處理後的力學性能保持率基本持平,而在100℃以上前者的力學性能保持率則明顯優于後者。
고찰료생물기취지탄성체/탄흑복합재료적내유성능,병여정정상효/탄흑복합재료진행료대비。결과표명,상온하장생물기취지탄성체/탄흑복합재료분별침포재연유( RP-3)、윤활유(4109)급액압유(YH-15)중직지용창,기랍신강도보지솔분별체도료86.8%,88.5%,73.0%;재100℃이하,생물기취지탄성체/탄흑복합재료여정정상효/탄흑복합재료재경고온RP-3연유처리후적역학성능보지솔기본지평,이재100℃이상전자적역학성능보지솔칙명현우우후자。
The oil resistance of bio-based polyes-ter elastomers(BEE)/carbon black(CB) composites was investigated and compared with that of nitrile rubber ( NBR )/CB composite.The results showed that after soaking in fuel oil RP-3, lubricating oil 4109 and hydraulic oil YH-15 at room temperature to swelling respectively , the tensile strength reten-tion of BEE/CB composite reached 86.8%,88.5%and 73.0% in turn.When both BEE/CB and NBR/CB composite were soaked in fuel oil RP-3 for 24 h below 100 ℃, the mechanical properties reten-tion of the two composites was in the same level , but soaked over 100 ℃, the former was far better than the latter.