压力容器
壓力容器
압력용기
2014年
6期
64-69
,共6页
张树潇%谢雪%刘丽丽%罗忠兵%杨会敏%张东辉%林莉%张贵锋
張樹瀟%謝雪%劉麗麗%囉忠兵%楊會敏%張東輝%林莉%張貴鋒
장수소%사설%류려려%라충병%양회민%장동휘%림리%장귀봉
超声衍射时差法%缺陷%高度分辨率%频谱分析
超聲衍射時差法%缺陷%高度分辨率%頻譜分析
초성연사시차법%결함%고도분변솔%빈보분석
time of flight diffraction( TOFD)%defect%height resolution%spectrum analysis
对壁厚220 mm的核反应堆压力容器焊缝超声衍射时差法( TOFD )检测中缺陷高度分辨率进行理论分析,绘制了缺陷高度分辨率随缺陷埋深变化的函数曲线。当缺陷高度小于系统高度分辨率时,提出利用基于傅里叶变换的频谱分析法测算缺陷高度。3个侧通孔(埋深22.5 mm,?3.0 mm;埋深40.0 mm,?2.0 mm;埋深80.0 mm,?2.0 mm)的试验分析结果验证了该方法的有效性。进一步的数值计算结果表明,对埋深182.0 mm,?2.0 mm侧通孔的TOFD检测信号进行频谱分析,能够准确确定缺陷高度。
對壁厚220 mm的覈反應堆壓力容器銲縫超聲衍射時差法( TOFD )檢測中缺陷高度分辨率進行理論分析,繪製瞭缺陷高度分辨率隨缺陷埋深變化的函數麯線。噹缺陷高度小于繫統高度分辨率時,提齣利用基于傅裏葉變換的頻譜分析法測算缺陷高度。3箇側通孔(埋深22.5 mm,?3.0 mm;埋深40.0 mm,?2.0 mm;埋深80.0 mm,?2.0 mm)的試驗分析結果驗證瞭該方法的有效性。進一步的數值計算結果錶明,對埋深182.0 mm,?2.0 mm側通孔的TOFD檢測信號進行頻譜分析,能夠準確確定缺陷高度。
대벽후220 mm적핵반응퇴압력용기한봉초성연사시차법( TOFD )검측중결함고도분변솔진행이론분석,회제료결함고도분변솔수결함매심변화적함수곡선。당결함고도소우계통고도분변솔시,제출이용기우부리협변환적빈보분석법측산결함고도。3개측통공(매심22.5 mm,?3.0 mm;매심40.0 mm,?2.0 mm;매심80.0 mm,?2.0 mm)적시험분석결과험증료해방법적유효성。진일보적수치계산결과표명,대매심182.0 mm,?2.0 mm측통공적TOFD검측신호진행빈보분석,능구준학학정결함고도。
The height resolution of 220 mm thick nuclear reactor pressure vessels in TOFD ( time of flight diffraction,TOFD) testing was analyzed theoretically,and the function curve of height resolution changed with the buried depth was drawn. When the height of defect was smaller than the height resolution of sys-tem,a method based on spectrum analysis to size the height of a defect was proposed. The method′s effec-tiveness was validated by experiment on three side-drilled hole (22. 5 mm buried,?3. 0 mm;40. 0 mm buried,?2. 0 mm;80. 0 mm buried,?2. 0 mm). The further numerical simulation result demonstrated that the height of a 182. 0 mm buried,?2. 0 mm side-drilled hole can be evaluated accurately by using the spectrum analysis method.