炼油技术与工程
煉油技術與工程
련유기술여공정
PETROLEUM REFINERY ENGINEERING
2014年
6期
8-12
,共5页
李铁森%刘瑞萍%王佩瑜%王国旗
李鐵森%劉瑞萍%王珮瑜%王國旂
리철삼%류서평%왕패유%왕국기
FCC%超低硫%清洁汽油%加氢脱硫技术%非加氢
FCC%超低硫%清潔汽油%加氫脫硫技術%非加氫
FCC%초저류%청길기유%가경탈류기술%비가경
FCC%ultra-low%sulfur%clean%gasoline%hydrodesulfurization%technology%non-hydrogenation
高硫原油加工量的日趋增加以及对汽油中硫、氮、烯烃、芳烃及添加剂加入量越来越严格的限制,必然推动油品质量升级及炼油厂加工方案的调整.从原油含硫分布及脱硫工艺两个方面分析了国内清洁汽油生产面临的挑战,强调降低催化裂化(FCC)汽油中的硫含量是清洁汽油生产的关键,对比了可满足未来超低硫规范要求的3条清洁汽油后处理脱硫技术路线,即选择性加氢脱硫技术、非选择性加氢脱硫技术和非加氢脱硫技术,剖析了FCC原料加氢处理脱硫及FCC加工过程脱硫的技术特点,介绍了未来清洁汽油生产可能的组合加工工艺.
高硫原油加工量的日趨增加以及對汽油中硫、氮、烯烴、芳烴及添加劑加入量越來越嚴格的限製,必然推動油品質量升級及煉油廠加工方案的調整.從原油含硫分佈及脫硫工藝兩箇方麵分析瞭國內清潔汽油生產麵臨的挑戰,彊調降低催化裂化(FCC)汽油中的硫含量是清潔汽油生產的關鍵,對比瞭可滿足未來超低硫規範要求的3條清潔汽油後處理脫硫技術路線,即選擇性加氫脫硫技術、非選擇性加氫脫硫技術和非加氫脫硫技術,剖析瞭FCC原料加氫處理脫硫及FCC加工過程脫硫的技術特點,介紹瞭未來清潔汽油生產可能的組閤加工工藝.
고류원유가공량적일추증가이급대기유중류、담、희경、방경급첨가제가입량월래월엄격적한제,필연추동유품질량승급급련유엄가공방안적조정.종원유함류분포급탈류공예량개방면분석료국내청길기유생산면림적도전,강조강저최화열화(FCC)기유중적류함량시청길기유생산적관건,대비료가만족미래초저류규범요구적3조청길기유후처리탈류기술로선,즉선택성가경탈류기술、비선택성가경탈류기술화비가경탈류기술,부석료FCC원료가경처리탈류급FCC가공과정탈류적기술특점,개소료미래청길기유생산가능적조합가공공예.