建筑节能
建築節能
건축절능
CONSTRUCTION CONSERVES ENERGY
2014年
7期
24-27
,共4页
张雯%李维%葛杨慧%宋文前%陈立楠%陈巍
張雯%李維%葛楊慧%宋文前%陳立楠%陳巍
장문%리유%갈양혜%송문전%진립남%진외
温湿度独立控制%固体吸附除湿%硅胶%活性氧化铝%13X分子筛
溫濕度獨立控製%固體吸附除濕%硅膠%活性氧化鋁%13X分子篩
온습도독립공제%고체흡부제습%규효%활성양화려%13X분자사
independent control of temperature and humidity%solid desiccant dehumidification%silica gel%activated alumina%13X molecular sieve
通过实验分析了硅胶、活性氧化铝和13X分子筛的再生、吸附性能。结果表明:在再生阶段,在风量330 m3/h、空气温度70℃、含湿量5.46 g/kg时,13X分子筛的再生性能最优;在吸附阶段,风量为330 m3/h、空气温度28℃、含湿量17.96 g/kg时,活性氧化铝和13X分子筛的平均吸附量基本一样,优于硅胶;而相同风量、空气温度32℃、含湿量18.09 g/kg的工况下,13X分子筛的吸附性能最优。因此,在该实验条件下,13X分子筛表现出更强的再生和吸附能力,更适合用于固定床吸附除湿。
通過實驗分析瞭硅膠、活性氧化鋁和13X分子篩的再生、吸附性能。結果錶明:在再生階段,在風量330 m3/h、空氣溫度70℃、含濕量5.46 g/kg時,13X分子篩的再生性能最優;在吸附階段,風量為330 m3/h、空氣溫度28℃、含濕量17.96 g/kg時,活性氧化鋁和13X分子篩的平均吸附量基本一樣,優于硅膠;而相同風量、空氣溫度32℃、含濕量18.09 g/kg的工況下,13X分子篩的吸附性能最優。因此,在該實驗條件下,13X分子篩錶現齣更彊的再生和吸附能力,更適閤用于固定床吸附除濕。
통과실험분석료규효、활성양화려화13X분자사적재생、흡부성능。결과표명:재재생계단,재풍량330 m3/h、공기온도70℃、함습량5.46 g/kg시,13X분자사적재생성능최우;재흡부계단,풍량위330 m3/h、공기온도28℃、함습량17.96 g/kg시,활성양화려화13X분자사적평균흡부량기본일양,우우규효;이상동풍량、공기온도32℃、함습량18.09 g/kg적공황하,13X분자사적흡부성능최우。인차,재해실험조건하,13X분자사표현출경강적재생화흡부능력,경괄합용우고정상흡부제습。
The regeneration and adsorption performance of silica gel, activated alumina and 13X molecular sieve are analyzed by experiments. The results show: in regeneration phase, 13X molecular sieve has the best performance when air rate is 330 m3/h, air temperature is 70℃and humidity ratio is 5.46 g/kg;In adsorption phase, the average adsorption performance of activated alumina is basically the same as 13X molecular sieve, which is better than silica gel when air rate is 330 m3/h, the air temperature is 28 ℃ and the humidity ratio is 17.96 g/kg; When the air rate is the same, air temperature is 32 ℃, and the humidity ratio is 18.09 g/kg, the adsorption performance of 13X molecular sieve is the best. As a result, under this test conditions, 13X molecular sieve shows a better ability of regeneration and adsorption, which is more adopted to the fixed bed adsorption dehumidification.