食品研究与开发
食品研究與開髮
식품연구여개발
FOOD RESEARCH AND CEVELOPMENT
2014年
17期
53-57
,共5页
陈渊%杨家添%朱万仁%韦庆敏%何军
陳淵%楊傢添%硃萬仁%韋慶敏%何軍
진연%양가첨%주만인%위경민%하군
机械活化木薯淀粉%醋酸酯淀粉%取代度%反应效率
機械活化木藷澱粉%醋痠酯澱粉%取代度%反應效率
궤계활화목서정분%작산지정분%취대도%반응효솔
mechanical activated cassava starch%starch acetate%degree of substitution%reaction efficiency
以机械活化0.5 h的木薯淀粉和木薯原淀粉为原料,以醋酸酐为酯化试剂,氢氧化钠为催化剂,制备低取代度木薯淀粉醋酸酯。以淀粉醋酸酯的取代度和反应效率为评价指标,分别研究反应温度、反应时间、醋酸酐用量、pH各因素对其取代度和反应效率的影响。实验结果表明,反应温度、反应时间、醋酸酐用量、pH对木薯淀粉醋酸酯的取代度和反应效率均有影响。机械活化能显著提高木薯淀粉醋酸酯化反应的取代度和反应效率。通过试验得到制备低取代度木薯淀粉醋酸酯的较佳工艺条件为:反应温度为30℃,反应时间为40 min,醋酸酐用量为0.15 mL,pH为8.5时,在此条件下制备的醋酸酯淀粉的取代度为0.075、反应效率为87.45%。并用红外光谱对醋酸酯淀粉进行分析。
以機械活化0.5 h的木藷澱粉和木藷原澱粉為原料,以醋痠酐為酯化試劑,氫氧化鈉為催化劑,製備低取代度木藷澱粉醋痠酯。以澱粉醋痠酯的取代度和反應效率為評價指標,分彆研究反應溫度、反應時間、醋痠酐用量、pH各因素對其取代度和反應效率的影響。實驗結果錶明,反應溫度、反應時間、醋痠酐用量、pH對木藷澱粉醋痠酯的取代度和反應效率均有影響。機械活化能顯著提高木藷澱粉醋痠酯化反應的取代度和反應效率。通過試驗得到製備低取代度木藷澱粉醋痠酯的較佳工藝條件為:反應溫度為30℃,反應時間為40 min,醋痠酐用量為0.15 mL,pH為8.5時,在此條件下製備的醋痠酯澱粉的取代度為0.075、反應效率為87.45%。併用紅外光譜對醋痠酯澱粉進行分析。
이궤계활화0.5 h적목서정분화목서원정분위원료,이작산항위지화시제,경양화납위최화제,제비저취대도목서정분작산지。이정분작산지적취대도화반응효솔위평개지표,분별연구반응온도、반응시간、작산항용량、pH각인소대기취대도화반응효솔적영향。실험결과표명,반응온도、반응시간、작산항용량、pH대목서정분작산지적취대도화반응효솔균유영향。궤계활화능현저제고목서정분작산지화반응적취대도화반응효솔。통과시험득도제비저취대도목서정분작산지적교가공예조건위:반응온도위30℃,반응시간위40 min,작산항용량위0.15 mL,pH위8.5시,재차조건하제비적작산지정분적취대도위0.075、반응효솔위87.45%。병용홍외광보대작산지정분진행분석。
The cassava starch acetate of low degree of substitution were preparation using mechanical activated cassava starch which was mechanical activated for half an hour and the native starch as material acetic anhydride as acetylation reagent and sodium hydroxide as catalyst. The effects of reaction temperature, the reaction time, acetic anhydride amount and pH value on esterification of cassava starch were investigated respectively by using degree of substitution (DS) and reaction efficiency (RE)of starch acetate as evaluating parameter. The results showed that reaction temperature, the reaction time, acetic anhydride amount and pH value had certain effect on the DS and the RE of starch acetate. Mechanical activation can significantly increase the DS and the RE of starch acetate. The optimal technical conditions were obtained as reaction temperature 30℃, reaction time 40 minutes, acetic anhydride amount 0.15 mL, pH value 8.5. Under the conditions, the DS in the products was 0.075, and the RE was 87.45 %. Furthermore, the structure of activated starch and the starch acetate were further characterized by using FTIR.