绝缘材料
絕緣材料
절연재료
INSULATING MATERIALS
2014年
2期
33-35,40
,共4页
蒋耿杰%钟立松%陈武荣%覃家波%刘建文%唐志
蔣耿傑%鐘立鬆%陳武榮%覃傢波%劉建文%唐誌
장경걸%종립송%진무영%담가파%류건문%당지
硅烷偶联剂%母料法%注射型%酚醛模塑料%吸水率
硅烷偶聯劑%母料法%註射型%酚醛模塑料%吸水率
규완우련제%모료법%주사형%분철모소료%흡수솔
silane coupling agent%masterbatch method%injection type%phenolic molding compound%water absorption
针对注射型酚醛模塑料的强度低及耐水性不好等问题，采用偶联剂改性方法，分析了偶联剂添加方式、种类及用量对酚醛模塑料性能的影响。结果表明：采用母料法且硅烷偶联剂用量为1.5%时，注射型酚醛模塑料的无缺口冲击强度和弯曲强度分别提高了61.55%和36.31%，吸水率降低了63.74%。
針對註射型酚醛模塑料的彊度低及耐水性不好等問題，採用偶聯劑改性方法，分析瞭偶聯劑添加方式、種類及用量對酚醛模塑料性能的影響。結果錶明：採用母料法且硅烷偶聯劑用量為1.5%時，註射型酚醛模塑料的無缺口遲擊彊度和彎麯彊度分彆提高瞭61.55%和36.31%，吸水率降低瞭63.74%。
침대주사형분철모소료적강도저급내수성불호등문제，채용우련제개성방법，분석료우련제첨가방식、충류급용량대분철모소료성능적영향。결과표명：채용모료법차규완우련제용량위1.5%시，주사형분철모소료적무결구충격강도화만곡강도분별제고료61.55%화36.31%，흡수솔강저료63.74%。
In view of the low intensity and poor water resistance of injection type phenolic molding com-pound, the effect of adding method, type and dosage of silane coupling agent on the properties of the phenolic molding compound was studied. The results show that when the adding method uses master-batch method and the silane coupling agent dosage is 1.5%, the non-notched impact strength and flexural strength of the phenolic molding compound increase by 61.55% and 36.31% respectively, and the water absorption decreases by 63.74%.
