CAJ | 학술논문

介绍了“强光一号”Z箍缩激光探针光路的设计及搭建、激光器光源品质优化、激光器触发系统设计及与加速器同步调试等，并利用初步建立的激光探针对平面型 W丝阵和 Al丝阵Z箍缩过程进行了诊断。结果表明：激光探针能够反映出 Z箍缩各阶段的典型特征，包括熔蚀不均匀性、亚毫米级准周期调制结构、内爆过程不稳定性、滞止阶段拖尾等。指出了现有激光探针系统需要改进的环节，包括激光器触发、探针图像记录、条纹数据定量分析等。
개소료“강광일호”Z고축격광탐침광로적설계급탑건、격광기광원품질우화、격광기촉발계통설계급여가속기동보조시등，병이용초보건립적격광탐침대평면형 W사진화 Al사진Z고축과정진행료진단。결과표명：격광탐침능구반영출 Z고축각계단적전형특정，포괄용식불균균성、아호미급준주기조제결구、내폭과정불은정성、체지계단타미등。지출료현유격광탐침계통수요개진적배절，포괄격광기촉발、탐침도상기록、조문수거정량분석등。
This paper describes a laser probing system for wire array Z-pinches established on Qiangguang facilityincluding design of the laser optical systemthe improvement on the quality of the laser sourceand the synchronizer triggering system for laser source and the facility.The system has been applied in Z-pinch experiments of aluminum and tungsten pla-nar wire arrays.The experimental results show that the typical characteristics of Z-pinch loads in different phase can be exactly recorded by the laser probing systemsuch as the non-uniform erosion of the wiresthe quasi-periodic modulation structure with submilimeter scale wavelengththe instability during the implosionand the tail mass distribution in the stagna-tion.The further research and improvements should be carried out on the triggering systemrecording system and quantitative analysis of the streak.