南华大学学报(自然科学版)
南華大學學報(自然科學版)
남화대학학보(자연과학판)
JOURNAL OF NANHUA UNIVERSITY(SCIENCE AND TECHNOLOGY)
2014年
1期
59-62,68
,共5页
陈桂荣%任勇%邱长军%邹树梁%李林升%周炬
陳桂榮%任勇%邱長軍%鄒樹樑%李林升%週炬
진계영%임용%구장군%추수량%리림승%주거
辐射防护%支撑座%ANSYS Workbench%结构静力分析%目标驱动优化
輻射防護%支撐座%ANSYS Workbench%結構靜力分析%目標驅動優化
복사방호%지탱좌%ANSYS Workbench%결구정력분석%목표구동우화
radiation protection%supporting pedestal%ANSYS Workbench%static structural analysis%goal driven optimization
由于增加屏蔽层后的防辐射驾驶舱较之原来驾驶舱增重了5.5 T,故有必要对支撑座的强度进行分析与校核.本文运用ANSYS Workbench对挖掘机驾驶舱屏蔽层的支撑座进行结构静力分析,得到支撑座在5.5 T载荷下的等效应力、变形等分布情况.通过目标驱动优化模块,在满足工况条件下对支撑座截面厚度尺寸进行优化,为支撑座设计提供了依据.
由于增加屏蔽層後的防輻射駕駛艙較之原來駕駛艙增重瞭5.5 T,故有必要對支撐座的彊度進行分析與校覈.本文運用ANSYS Workbench對挖掘機駕駛艙屏蔽層的支撐座進行結構靜力分析,得到支撐座在5.5 T載荷下的等效應力、變形等分佈情況.通過目標驅動優化模塊,在滿足工況條件下對支撐座截麵厚度呎吋進行優化,為支撐座設計提供瞭依據.
유우증가병폐층후적방복사가사창교지원래가사창증중료5.5 T,고유필요대지탱좌적강도진행분석여교핵.본문운용ANSYS Workbench대알굴궤가사창병폐층적지탱좌진행결구정력분석,득도지탱좌재5.5 T재하하적등효응력、변형등분포정황.통과목표구동우화모괴,재만족공황조건하대지탱좌절면후도척촌진행우화,위지탱좌설계제공료의거.
Due to the adding of the shielding layer,the radiation protection cockpit increased 5.5 T compared with the original weight,which made it necessary to analyze and check the strength of the supporting pedestal. In this paper,the static analysis on the structure of an ex-cavator cockpit shielding layer supporting pedestal was achieved by means of ANSYS Work-bench,and the equivalent stress and deformation distribution of supporting pedestal under the load of 5. 5 T were obtained. The thickness size of the supporting pedestal section was optimized in order to get the best program under the working condition by using goal driven optimization module,which provided the basis for the supporting pedestal's design.