功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
9期
9075-9079
,共5页
朱继翔%彭晔%阳范文%田秀梅%陈晓明
硃繼翔%彭曄%暘範文%田秀梅%陳曉明
주계상%팽엽%양범문%전수매%진효명
明胶%多孔支架%丝蛋白%生长因子%控制释放
明膠%多孔支架%絲蛋白%生長因子%控製釋放
명효%다공지가%사단백%생장인자%공제석방
gelatin%porous scaffold%silk fibroin%growth factor%control release
在组织工程支架表面沉积含有生长因子的丝蛋白层,通过丝蛋白β构象转变,固定生长因子于支架表面.研究此种生长因子负载方法对明胶多孔支架性能的影响,结果表明,因子负载前后支架的孔隙率皆达到90%以上,吸水量皆为干燥时支架质量的18倍左右;力学测试表明,因子负载后支架的压缩模量增加至26.1 kPa;Elisa检测表明,在各取样时间点,每毫克支架缓释活性EGF的量约在0.3~0.5 ng之间,4周累积释放活性EGF达到3.473 ng;MTT实验与SEM观察表明,用此种方法负载因子于支架中,可以有效促进支架中细胞的生长.
在組織工程支架錶麵沉積含有生長因子的絲蛋白層,通過絲蛋白β構象轉變,固定生長因子于支架錶麵.研究此種生長因子負載方法對明膠多孔支架性能的影響,結果錶明,因子負載前後支架的孔隙率皆達到90%以上,吸水量皆為榦燥時支架質量的18倍左右;力學測試錶明,因子負載後支架的壓縮模量增加至26.1 kPa;Elisa檢測錶明,在各取樣時間點,每毫剋支架緩釋活性EGF的量約在0.3~0.5 ng之間,4週纍積釋放活性EGF達到3.473 ng;MTT實驗與SEM觀察錶明,用此種方法負載因子于支架中,可以有效促進支架中細胞的生長.
재조직공정지가표면침적함유생장인자적사단백층,통과사단백β구상전변,고정생장인자우지가표면.연구차충생장인자부재방법대명효다공지가성능적영향,결과표명,인자부재전후지가적공극솔개체도90%이상,흡수량개위간조시지가질량적18배좌우;역학측시표명,인자부재후지가적압축모량증가지26.1 kPa;Elisa검측표명,재각취양시간점,매호극지가완석활성EGF적량약재0.3~0.5 ng지간,4주루적석방활성EGF체도3.473 ng;MTT실험여SEM관찰표명,용차충방법부재인자우지가중,가이유효촉진지가중세포적생장.
Using silk fibroin as a co-absorbed and protective carrier,a novel method of growth factor loading in tissue engineering scaffold was developed.The influence of the growth factor loading technology to the property of gelatin porous scaffold was studied.The porosities of gelatin scaffold and SF/EGF modified scaffold were over 90%.The water uptake increased 18 times after SF/EGF modification.Compressive tests showed an in-crease of compressive modulus at 26.1 kPa after SF/EGF modification.Elisa test displayed that active EGF could be detected in 4 weeks in vitro.The dose of released EGF from a milligram scaffold was in the range of 0.3-0.5 ng in every time intervals and the cumulative release was 3.473 ng during 28 d.MTT test and SEM ob-servation indicated that EGF loading scaffold improved the growth of epithelial cells.This growth factor loading method may be particularly useful in modification of tissue engineering scaffold.