中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2014年
10期
1395-1399
,共5页
王东伟%莫继良%陈光雄%朱旻昊
王東偉%莫繼良%陳光雄%硃旻昊
왕동위%막계량%진광웅%주민호
摩擦振动%摩擦噪声%有限元%非线性显式动力学
摩抆振動%摩抆譟聲%有限元%非線性顯式動力學
마찰진동%마찰조성%유한원%비선성현식동역학
friction vibration%friction noise%finite element%nonlinear explicit dynamics
利用有限元软件ABAQUS/Explicit(显式动态求解器)对球平面接触条件下的滑动摩擦振动噪声进行了数值模拟分析。对比试验结果,探讨了摩擦噪声的发生机制,并分析了摩擦噪声发生时接触界面的运动特性。结果表明,摩擦噪声主要是由摩擦系统的自激振动引起的,法向振动与切向振动的耦合是系统产生自激振动和摩擦噪声的一个重要因素。当摩擦系统发生自激振动时,从面节点与主面的接触并不是连续不变的,两者在相对运动的过程中具有黏着-滑动-分离-黏着的特性。
利用有限元軟件ABAQUS/Explicit(顯式動態求解器)對毬平麵接觸條件下的滑動摩抆振動譟聲進行瞭數值模擬分析。對比試驗結果,探討瞭摩抆譟聲的髮生機製,併分析瞭摩抆譟聲髮生時接觸界麵的運動特性。結果錶明,摩抆譟聲主要是由摩抆繫統的自激振動引起的,法嚮振動與切嚮振動的耦閤是繫統產生自激振動和摩抆譟聲的一箇重要因素。噹摩抆繫統髮生自激振動時,從麵節點與主麵的接觸併不是連續不變的,兩者在相對運動的過程中具有黏著-滑動-分離-黏著的特性。
이용유한원연건ABAQUS/Explicit(현식동태구해기)대구평면접촉조건하적활동마찰진동조성진행료수치모의분석。대비시험결과,탐토료마찰조성적발생궤제,병분석료마찰조성발생시접촉계면적운동특성。결과표명,마찰조성주요시유마찰계통적자격진동인기적,법향진동여절향진동적우합시계통산생자격진동화마찰조성적일개중요인소。당마찰계통발생자격진동시,종면절점여주면적접촉병불시련속불변적,량자재상대운동적과정중구유점착-활동-분리-점착적특성。
A numerical simulation was performed to study the sliding friction-induced vibrations and noises in a ball-on-flat configuration.The numerical simulation results were discussed with the ex-perimental results,to investigate the mechanism of friction-induced vibrations and noises,and the dy-namics characteristics of frictional contact surfaces when noise occurred.The results show that friction noise is caused mainly by self-excited vibration of friction system.The coupling of normal and tangen-tial vibrations plays an important role in the occurrence of self-excited vibration and friction noise.The slave nodes are found to be not in continuous contact with the master surface when self-excited vibra-tion occurs.The contact between slave nodes and master surface in a relative motion has a characteris-tic of stick-slip-separation-stick.