CAJ | 학술논문

针对丘德尔区块矿化度高、油藏温度低的具体情况，本文对聚合物进行相关参数的评价之后，初选出了3种聚合物，对其进行适应性研究。通过研究几种聚合物溶液的黏温关系曲线以及黏浓关系曲线认为，聚合物凝胶溶液在聚合物溶液浓度为3000 mg/L时，就可以满足该区块理论要求的黏度。并结合聚合物溶液在高矿化度条件下发生降解的实际情况，在聚合物溶液中按聚铬比30∶1加入质量分数为2.6%的乙酸铬，并加入一定质量分数的缓凝剂。通过测定体系的稳定性，认为：聚铬比30∶1的凝胶溶液满足油藏实际条件。并通过室内物理模拟实验，确定了凝胶溶液注入段塞尺寸大小为0.4 PV，之后优选出了最适合该区块的聚合物及其注入方式。
침대구덕이구괴광화도고、유장온도저적구체정황，본문대취합물진행상관삼수적평개지후，초선출료3충취합물，대기진행괄응성연구。통과연구궤충취합물용액적점온관계곡선이급점농관계곡선인위，취합물응효용액재취합물용액농도위3000 mg/L시，취가이만족해구괴이론요구적점도。병결합취합물용액재고광화도조건하발생강해적실제정황，재취합물용액중안취락비30∶1가입질량분수위2.6%적을산락，병가입일정질량분수적완응제。통과측정체계적은정성，인위：취락비30∶1적응효용액만족유장실제조건。병통과실내물리모의실험，학정료응효용액주입단새척촌대소위0.4 PV，지후우선출료최괄합해구괴적취합물급기주입방식。
In view of the actual conditions of childers reservoir with low temperature, high salinity , this text select three kinds of polymer by evaluating the related parameters of polymer which is resistant to high salinity to discuss the performance and adaptability.From the polymer viscosity-concentration relationship and viscosity-temperature relationship, it can be concluded that when the concentration of the HDSJ is 3 000 mg/L, it can meet the requirements of the theory of reservoir viscosity values. In view of the problems of polymer degradation at high salinity, those experiences join the mass fraction of chromium acetate 2.6% with retarder, to cross-linking in a single polymer solution based on 30:1 polymer chromium rate. By testing the stability of cross-linking system, we can conclude that HDSJ gel solution with polymer chromium ratio 30:1 can meet the reservoir conditions.