四川有色金属
四川有色金屬
사천유색금속
SICHUAN NONFERROUS METALS
2009年
3期
23-27
,共5页
何宇%周大利%胡驰%罗宇智%熊仁金
何宇%週大利%鬍馳%囉宇智%熊仁金
하우%주대리%호치%라우지%웅인금
纳米碳化钨%燃料电池%Pt/WC复合材料%玻璃碳%循环伏安法
納米碳化鎢%燃料電池%Pt/WC複閤材料%玻璃碳%循環伏安法
납미탄화오%연료전지%Pt/WC복합재료%파리탄%순배복안법
采用溶胶-凝胶法,以钨酸钠为钨源、酚醛树脂为碳源合成碳化钨前驱体干凝胶,经原位碳化制备纳米碳化钨(WC)粉体,纳米WC粉体中的玻璃碳采用浓硝酸浸渍法脱除.在纳米WC粉料浆中以甲醛(HCHO)作为氯铂酸(H2PtCl6·6H2O)的还原剂,室温合成得到Pt/WC复合催化剂材料;以XRD、SEM、EDS等测试方法对样品的理化特性进行表征,并在酸性介质中采用循环伏安法测试材料的电化学催化活性.结果表明:相较于未经过脱碳处理的WC,经过浓硝酸脱碳处理后的Pr/WC电极催化材料的催化活性更好.经溶胶-凝胶法及原位碳化制备的纳米WC的颗粒径为20-80纳米,其本身具备较好的电催化活性.样品中残留的玻璃碳对WC具有包覆作用,会降低WC的电催化活性.采取浓稍酸脱碳的方式可有效脱除纳米WC粉体中的玻璃碳,发挥WC材料作为电极催化材料的电催化活性.
採用溶膠-凝膠法,以鎢痠鈉為鎢源、酚醛樹脂為碳源閤成碳化鎢前驅體榦凝膠,經原位碳化製備納米碳化鎢(WC)粉體,納米WC粉體中的玻璃碳採用濃硝痠浸漬法脫除.在納米WC粉料漿中以甲醛(HCHO)作為氯鉑痠(H2PtCl6·6H2O)的還原劑,室溫閤成得到Pt/WC複閤催化劑材料;以XRD、SEM、EDS等測試方法對樣品的理化特性進行錶徵,併在痠性介質中採用循環伏安法測試材料的電化學催化活性.結果錶明:相較于未經過脫碳處理的WC,經過濃硝痠脫碳處理後的Pr/WC電極催化材料的催化活性更好.經溶膠-凝膠法及原位碳化製備的納米WC的顆粒徑為20-80納米,其本身具備較好的電催化活性.樣品中殘留的玻璃碳對WC具有包覆作用,會降低WC的電催化活性.採取濃稍痠脫碳的方式可有效脫除納米WC粉體中的玻璃碳,髮揮WC材料作為電極催化材料的電催化活性.
채용용효-응효법,이오산납위오원、분철수지위탄원합성탄화오전구체간응효,경원위탄화제비납미탄화오(WC)분체,납미WC분체중적파리탄채용농초산침지법탈제.재납미WC분료장중이갑철(HCHO)작위록박산(H2PtCl6·6H2O)적환원제,실온합성득도Pt/WC복합최화제재료;이XRD、SEM、EDS등측시방법대양품적이화특성진행표정,병재산성개질중채용순배복안법측시재료적전화학최화활성.결과표명:상교우미경과탈탄처리적WC,경과농초산탈탄처리후적Pr/WC전겁최화재료적최화활성경호.경용효-응효법급원위탄화제비적납미WC적과립경위20-80납미,기본신구비교호적전최화활성.양품중잔류적파리탄대WC구유포복작용,회강저WC적전최화활성.채취농초산탈탄적방식가유효탈제납미WC분체중적파리탄,발휘WC재료작위전겁최화재료적전최화활성.