激光技术
激光技術
격광기술
LASER TECHNOLOGY
2014年
3期
360-363
,共4页
激光器%Nd∶GGG%热效应%LD端面抽运
激光器%Nd∶GGG%熱效應%LD耑麵抽運
격광기%Nd∶GGG%열효응%LD단면추운
lasers%Nd∶GGG%thermal effect%LD end-pumped
为了研究激光二极管端面抽运掺钕钆镓石榴石Nd∶GGG激光器的热效应,采用实验测量与理论计算结合的方法,进行了激光器的连续运转,测量了激光器的热焦距、本征损耗和热损耗。结果表明,采用凹-平腔结构,当抽运功率为28.8W时,得到最大连续波输出功率为13.2W,对应最大斜效率为51.5%,光光转换效率为49.5%, Nd∶GGG晶体的本征损耗测量值为0.86%/cm;测量结果与理论计算吻合得很好。所得结果为LD抽运Nd∶GGG激光器的进一步设计优化提供了实验和理论依据。
為瞭研究激光二極管耑麵抽運摻釹釓鎵石榴石Nd∶GGG激光器的熱效應,採用實驗測量與理論計算結閤的方法,進行瞭激光器的連續運轉,測量瞭激光器的熱焦距、本徵損耗和熱損耗。結果錶明,採用凹-平腔結構,噹抽運功率為28.8W時,得到最大連續波輸齣功率為13.2W,對應最大斜效率為51.5%,光光轉換效率為49.5%, Nd∶GGG晶體的本徵損耗測量值為0.86%/cm;測量結果與理論計算吻閤得很好。所得結果為LD抽運Nd∶GGG激光器的進一步設計優化提供瞭實驗和理論依據。
위료연구격광이겁관단면추운참녀구가석류석Nd∶GGG격광기적열효응,채용실험측량여이론계산결합적방법,진행료격광기적련속운전,측량료격광기적열초거、본정손모화열손모。결과표명,채용요-평강결구,당추운공솔위28.8W시,득도최대련속파수출공솔위13.2W,대응최대사효솔위51.5%,광광전환효솔위49.5%, Nd∶GGG정체적본정손모측량치위0.86%/cm;측량결과여이론계산문합득흔호。소득결과위LD추운Nd∶GGG격광기적진일보설계우화제공료실험화이론의거。
In order to study the thermal effect of LD end-pumped Nd∶GGG laser, the thermal focal length , intrinsic loss and thermal loss were measured with the laser operating continuously .The results show the maximal output power of 13.2W, the maximal slope efficiency of 51.5%and the optical conversion efficiency of 49.5%were obtained in a plano-concave cavity when the pump power was 28.8W.The intrinsic loss of Nd∶GGG crystal was 0.86%/cm.The result was in good agreement with the theoretically calculation .The results can offer experimental and theoretical basis for the further optimizaiton of LD pumped Nd∶GGG laser.