材料工程
材料工程
재료공정
JOURNAL OF MATERIALS ENGINEERING
2014年
2期
24-28
,共5页
李国禄%王海斗%徐滨士%马国政%张森
李國祿%王海鬥%徐濱士%馬國政%張森
리국록%왕해두%서빈사%마국정%장삼
复合物电刷镀%MoS2固体润滑膜%原子氧%氧化产物%摩擦学性能
複閤物電刷鍍%MoS2固體潤滑膜%原子氧%氧化產物%摩抆學性能
복합물전쇄도%MoS2고체윤활막%원자양%양화산물%마찰학성능
composite electricity brush plating%lubricating film of MoS2%atomic oxygen%oxidize product%tribological property
研究了空间原子氧对电刷镀Ni/MoS2-C固体润滑镀层的影响,通过SEM,EDS以及TEM观测了镀层的微观结构及成分,采用XRD确定了镀层的相结构,并利用MSTS-1多功能摩擦磨损试验机对比原子氧辐照不同时间后镀层摩擦学性能的变化情况.结果表明:原子氧对电刷镀Ni/MoS2-C复合镀层的氧化腐蚀作用明显,镀层中氧化产物MoO3增加,同时镀层表面氧化膜的存在使得其摩擦因数在实验初期阶段相对较低,镀层表面经一定能量的原子氧高速轰击后材料表面结构分布不均,进而在真空吸气作用下造成的应力变化导致微观裂纹数量增加且镀层致密性遭到一定程度的破坏,但氧化膜的存在有效地降低了镀层起始摩擦因数,原子氧的能量还不足以完全破坏Ni/MoS2-C镀层的摩擦学性能.
研究瞭空間原子氧對電刷鍍Ni/MoS2-C固體潤滑鍍層的影響,通過SEM,EDS以及TEM觀測瞭鍍層的微觀結構及成分,採用XRD確定瞭鍍層的相結構,併利用MSTS-1多功能摩抆磨損試驗機對比原子氧輻照不同時間後鍍層摩抆學性能的變化情況.結果錶明:原子氧對電刷鍍Ni/MoS2-C複閤鍍層的氧化腐蝕作用明顯,鍍層中氧化產物MoO3增加,同時鍍層錶麵氧化膜的存在使得其摩抆因數在實驗初期階段相對較低,鍍層錶麵經一定能量的原子氧高速轟擊後材料錶麵結構分佈不均,進而在真空吸氣作用下造成的應力變化導緻微觀裂紋數量增加且鍍層緻密性遭到一定程度的破壞,但氧化膜的存在有效地降低瞭鍍層起始摩抆因數,原子氧的能量還不足以完全破壞Ni/MoS2-C鍍層的摩抆學性能.
연구료공간원자양대전쇄도Ni/MoS2-C고체윤활도층적영향,통과SEM,EDS이급TEM관측료도층적미관결구급성분,채용XRD학정료도층적상결구,병이용MSTS-1다공능마찰마손시험궤대비원자양복조불동시간후도층마찰학성능적변화정황.결과표명:원자양대전쇄도Ni/MoS2-C복합도층적양화부식작용명현,도층중양화산물MoO3증가,동시도층표면양화막적존재사득기마찰인수재실험초기계단상대교저,도층표면경일정능량적원자양고속굉격후재료표면결구분포불균,진이재진공흡기작용하조성적응력변화도치미관렬문수량증가차도층치밀성조도일정정도적파배,단양화막적존재유효지강저료도층기시마찰인수,원자양적능량환불족이완전파배Ni/MoS2-C도층적마찰학성능.