甘肃高师学报
甘肅高師學報
감숙고사학보
JOURNAL OF GANSU NORMAL COLLEGES
2013年
2期
44-46
,共3页
常国华%马明广%徐飞%张鸣%常进文
常國華%馬明廣%徐飛%張鳴%常進文
상국화%마명엄%서비%장명%상진문
火焰原子吸收法%1,10-菲啰啉分光光度法%铁
火燄原子吸收法%1,10-菲啰啉分光光度法%鐵
화염원자흡수법%1,10-비라람분광광도법%철
分别用火焰原子吸收法和1,10-菲啰啉分光光度法测定铬铁废液中铁的总量.绘制了两种方法的标准曲线,测定了空白值、加标回收率和标准样品.两种方法的空白值都比较稳定,相关性以及斜率等数值都很接近,它们的准确度都比较好,相对标准偏差分别为1.2%和2.6%.两者的平均回收率分别为108%和94%,基本符合实验要求.因此,两种方法的测定结果都在真值允许范围内,它们的标准曲线,精密度和准确性都比较好.两种方法的结果通过t检验,无显著性差异.两者都适用于低浓度的铁溶液,但分光光度法灵敏度稍高.
分彆用火燄原子吸收法和1,10-菲啰啉分光光度法測定鉻鐵廢液中鐵的總量.繪製瞭兩種方法的標準麯線,測定瞭空白值、加標迴收率和標準樣品.兩種方法的空白值都比較穩定,相關性以及斜率等數值都很接近,它們的準確度都比較好,相對標準偏差分彆為1.2%和2.6%.兩者的平均迴收率分彆為108%和94%,基本符閤實驗要求.因此,兩種方法的測定結果都在真值允許範圍內,它們的標準麯線,精密度和準確性都比較好.兩種方法的結果通過t檢驗,無顯著性差異.兩者都適用于低濃度的鐵溶液,但分光光度法靈敏度稍高.
분별용화염원자흡수법화1,10-비라람분광광도법측정락철폐액중철적총량.회제료량충방법적표준곡선,측정료공백치、가표회수솔화표준양품.량충방법적공백치도비교은정,상관성이급사솔등수치도흔접근,타문적준학도도비교호,상대표준편차분별위1.2%화2.6%.량자적평균회수솔분별위108%화94%,기본부합실험요구.인차,량충방법적측정결과도재진치윤허범위내,타문적표준곡선,정밀도화준학성도비교호.량충방법적결과통과t검험,무현저성차이.량자도괄용우저농도적철용액,단분광광도법령민도초고.