中国电机工程学报
中國電機工程學報
중국전궤공정학보
ZHONGGUO DIANJI GONGCHENG XUEBAO
2012年
15期
155-161
,共7页
赵洋%韦莉%张逸成%孙家南
趙洋%韋莉%張逸成%孫傢南
조양%위리%장일성%손가남
超级电容器%建模%粒子群优化%结构辨识%参数%辨识%输出误差准则
超級電容器%建模%粒子群優化%結構辨識%參數%辨識%輸齣誤差準則
초급전용기%건모%입자군우화%결구변식%삼수%변식%수출오차준칙
supercapacitor%optimization (PSO)%structureidentification%output error criterionmodeling%particle swarm identification%parameter
为了分析超级电容器的动态特性,并准确估计荷电状态、健康状态等信息,需要建立超级电容器模型。提出以系统辨识方法作为建模手段,为克服广义误差准则不能保证模型输出误差最小的缺点,采用输出误差准则并推导出对应的非线性目标函数。应用粒子群优化算法对该目标函数进行优化求解,并获得模型参数。针对结构辨识问题,采用最终输出误差准则计算结构判别指标,通过比较该指标值确定模型最佳阶次。实验和仿真结果表明,所提模型能精确描述超级电容器的动态特性,建模方法可行。
為瞭分析超級電容器的動態特性,併準確估計荷電狀態、健康狀態等信息,需要建立超級電容器模型。提齣以繫統辨識方法作為建模手段,為剋服廣義誤差準則不能保證模型輸齣誤差最小的缺點,採用輸齣誤差準則併推導齣對應的非線性目標函數。應用粒子群優化算法對該目標函數進行優化求解,併穫得模型參數。針對結構辨識問題,採用最終輸齣誤差準則計算結構判彆指標,通過比較該指標值確定模型最佳階次。實驗和倣真結果錶明,所提模型能精確描述超級電容器的動態特性,建模方法可行。
위료분석초급전용기적동태특성,병준학고계하전상태、건강상태등신식,수요건립초급전용기모형。제출이계통변식방법작위건모수단,위극복엄의오차준칙불능보증모형수출오차최소적결점,채용수출오차준칙병추도출대응적비선성목표함수。응용입자군우화산법대해목표함수진행우화구해,병획득모형삼수。침대결구변식문제,채용최종수출오차준칙계산결구판별지표,통과비교해지표치학정모형최가계차。실험화방진결과표명,소제모형능정학묘술초급전용기적동태특성,건모방법가행。
In order to analyze the dynamical characteristics of supercapacitor and predict its state of charge (SOC) and state of health (SOH) correctly, the model of supercapacitor should be built at first. On the basis of analyzing the characteristics of different modeling methods, a system identification method was presented to model the supercapacitor. Because the general error criterion cannot insure the minimal output error, the output error criterion was adopted and a corresponding nonlinear objective function was deduced. Then the particle swarm optimization algorithm was used to solve the problem, and then the model's parameters were obtained. With respect to the structure identification, the final output error (FOE) criterion was introduced. By comparing the value of FOE, the best order of the model was determined. The results of experiments and simulations show that the model presented in the paper can describe the supercapacitor's dynamic characteristics precisely and the modeling method is feasible and valid.