化学与粘合
化學與粘閤
화학여점합
CHEMISTRY AND ADHESION
2013年
4期
21-23,28
,共4页
HMWPE%石墨%共混改性%性能
HMWPE%石墨%共混改性%性能
HMWPE%석묵%공혼개성%성능
UHMWPE%graphite%blending modification%property
采用物理共混改性的方法,制备了具有不同性能的超高分子量聚乙烯/石墨合金.研究了填料含量对合金性能的影响,DSC分析结果表明UHMWPE的热分解温度在455℃而熔点超过140℃,拉伸强度随石墨的添加明显下降,当石墨含量为5%时其拉伸强度下降到0.24MPa,冲击强度和摩擦磨损性能的测试结果表明,石墨填料的加入可以一定程度的改善合金材料的冲击性能和耐磨性能,石墨含量为1%时合金的摩擦系数由原来的0.14下降到0.12,而石墨较少时其冲击强度亦有所提高.
採用物理共混改性的方法,製備瞭具有不同性能的超高分子量聚乙烯/石墨閤金.研究瞭填料含量對閤金性能的影響,DSC分析結果錶明UHMWPE的熱分解溫度在455℃而鎔點超過140℃,拉伸彊度隨石墨的添加明顯下降,噹石墨含量為5%時其拉伸彊度下降到0.24MPa,遲擊彊度和摩抆磨損性能的測試結果錶明,石墨填料的加入可以一定程度的改善閤金材料的遲擊性能和耐磨性能,石墨含量為1%時閤金的摩抆繫數由原來的0.14下降到0.12,而石墨較少時其遲擊彊度亦有所提高.
채용물리공혼개성적방법,제비료구유불동성능적초고분자량취을희/석묵합금.연구료전료함량대합금성능적영향,DSC분석결과표명UHMWPE적열분해온도재455℃이용점초과140℃,랍신강도수석묵적첨가명현하강,당석묵함량위5%시기랍신강도하강도0.24MPa,충격강도화마찰마손성능적측시결과표명,석묵전료적가입가이일정정도적개선합금재료적충격성능화내마성능,석묵함량위1%시합금적마찰계수유원래적0.14하강도0.12,이석묵교소시기충격강도역유소제고.