印染助剂
印染助劑
인염조제
TEXTILE AUXILIARIES
2014年
4期
39-41,45
,共4页
蒋杭平%吴妙%张忠%王维明
蔣杭平%吳妙%張忠%王維明
장항평%오묘%장충%왕유명
黄麻纤维%精细化加工%汽蒸法%线密度
黃痳纖維%精細化加工%汽蒸法%線密度
황마섬유%정세화가공%기증법%선밀도
jute fiber%fine processing%steaming method%linear density
研究了黄麻纤维碱、氧一步汽蒸法精细化加工方法,对其工艺条件进行了优化。结果表明,汽蒸法精细化加工可有效改善黄麻纤维线密度；最优工艺为：配制整理液(氢氧化钠40 g/L,双氧水30 g/L,稳定剂24 g/L,渗透剂JFC 10 g/L)→室温下浸渍→脱水(带液率为110%)→汽蒸(110℃,40 min)→2 g/L硫酸中和→充分水洗→烘干。
研究瞭黃痳纖維堿、氧一步汽蒸法精細化加工方法,對其工藝條件進行瞭優化。結果錶明,汽蒸法精細化加工可有效改善黃痳纖維線密度；最優工藝為：配製整理液(氫氧化鈉40 g/L,雙氧水30 g/L,穩定劑24 g/L,滲透劑JFC 10 g/L)→室溫下浸漬→脫水(帶液率為110%)→汽蒸(110℃,40 min)→2 g/L硫痠中和→充分水洗→烘榦。
연구료황마섬유감、양일보기증법정세화가공방법,대기공예조건진행료우화。결과표명,기증법정세화가공가유효개선황마섬유선밀도；최우공예위：배제정리액(경양화납40 g/L,쌍양수30 g/L,은정제24 g/L,삼투제JFC 10 g/L)→실온하침지→탈수(대액솔위110%)→기증(110℃,40 min)→2 g/L류산중화→충분수세→홍간。
The steaming refining method of jute fiber with alkali and hydrogen peroxide in one step was studied, and the treatment conditions were optimized. The results showed that the linear density of jute fiber could be significantly improved by steaming refining method. The optimal process was summarized as fol ows:preparation of treatment solution (sodium hydroxide 40 g/L, hydrogen peroxide 30 g/L, stabilizer 24 g/L and penetrating agent JFC 10 g/L)→room temperature dipping→dewater (water pick-up 110%)→steaming (110 ℃, 40 min)→neutralization with 2 g/L sulfuric acid→thoroughly washed→dry.
