广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2012年
5期
162-163
,共2页
印染废水%O/A/O工艺%COD%絮凝
印染廢水%O/A/O工藝%COD%絮凝
인염폐수%O/A/O공예%COD%서응
printing an dyeing wastewater%O/A/O process%COD%flocculation
印染废水由于色度高、水质变化大、生化性差等特点,是当前工业废水处理的难点和焦点之一。采用絮凝-O/A/O-絮凝工艺处理印染废水,经过一年的实际运行,结果如下：其中CODCr、色度、SS、氨氮的平均去除率分别为97.1%、87.5%、95.2%、87.2%以上,出水达到《纺织染整工业水污染排放标准》（GB4287-92）的一级标准。该工艺具有运行稳定、耐冲击负荷能力强、难降解的有机物去除效果好,在印染废水处理中具有明显优势。
印染廢水由于色度高、水質變化大、生化性差等特點,是噹前工業廢水處理的難點和焦點之一。採用絮凝-O/A/O-絮凝工藝處理印染廢水,經過一年的實際運行,結果如下：其中CODCr、色度、SS、氨氮的平均去除率分彆為97.1%、87.5%、95.2%、87.2%以上,齣水達到《紡織染整工業水汙染排放標準》（GB4287-92）的一級標準。該工藝具有運行穩定、耐遲擊負荷能力彊、難降解的有機物去除效果好,在印染廢水處理中具有明顯優勢。
인염폐수유우색도고、수질변화대、생화성차등특점,시당전공업폐수처리적난점화초점지일。채용서응-O/A/O-서응공예처리인염폐수,경과일년적실제운행,결과여하：기중CODCr、색도、SS、안담적평균거제솔분별위97.1%、87.5%、95.2%、87.2%이상,출수체도《방직염정공업수오염배방표준》（GB4287-92）적일급표준。해공예구유운행은정、내충격부하능력강、난강해적유궤물거제효과호,재인염폐수처리중구유명현우세。
The treatment of wastewater from printing and dyeing is a problem of great difficulty and a focus of public attention as a result of its high color intensity,variation of water quality and poor biodegradation.Textile printing and dyeing wastewater was treated using flocculation-O/A/O-flocculation process.After operation for a year,the practical results indicated that the removal efficiencies of CODCr,color,SS,NH＋-N were over 97.1 %,87.5 %,95.2 %,87.2 %,respectively.The whole system kept good running through setting appropriate operational parameter.Its discharge water meets the I class criteria specified in the《Discharge Standard of Water Pollutant for Dyeing and Finishing of Textile Industry》（GB4287-92）.The running results show that it is of advantage for less residual sludge,stronger impact load endurance and higher removal efficiency on refractory organisms,and it is of utility in the treatment of textile printing and dyeing wastewater.
