四川环境
四川環境
사천배경
2012年
3期
98-105
,共8页
刘晓光%董滨%戴翎翎%戴晓虎
劉曉光%董濱%戴翎翎%戴曉虎
류효광%동빈%대령령%대효호
污泥%重金属%稳定化%去除
汙泥%重金屬%穩定化%去除
오니%중금속%은정화%거제
Sludge%heavy metals%stabilization%removal
通过“十一五”污水处理厂的建设,我国污泥产量也随之大幅增长,污泥的处理处置已经成为制约社会经济发展的重要问题。国际上的经验表明土地利用是污泥最终处置的主要发展方向,然而污泥中的重金属成为其土地利用的主要障碍。越来越多的研究者意识到,重金属的环境危害不仅仅取决于其总量,更取决于重金属存在形态。目前,Tessier分步提取法作为主流的污泥重金属划分方法,取得了广泛应用,该法将污泥中的重金属分成5种形态,分别为可交换态、碳酸盐结合态、铁锰氧化物结合态、有机结合态和残渣态。本文以此为基础综述了目前国内外主要的污泥重金属稳定和去除方法的原理及研究进展,比较了不同重金属稳定及去除方法的优点与不足,并提出了新的展望。
通過“十一五”汙水處理廠的建設,我國汙泥產量也隨之大幅增長,汙泥的處理處置已經成為製約社會經濟髮展的重要問題。國際上的經驗錶明土地利用是汙泥最終處置的主要髮展方嚮,然而汙泥中的重金屬成為其土地利用的主要障礙。越來越多的研究者意識到,重金屬的環境危害不僅僅取決于其總量,更取決于重金屬存在形態。目前,Tessier分步提取法作為主流的汙泥重金屬劃分方法,取得瞭廣汎應用,該法將汙泥中的重金屬分成5種形態,分彆為可交換態、碳痠鹽結閤態、鐵錳氧化物結閤態、有機結閤態和殘渣態。本文以此為基礎綜述瞭目前國內外主要的汙泥重金屬穩定和去除方法的原理及研究進展,比較瞭不同重金屬穩定及去除方法的優點與不足,併提齣瞭新的展望。
통과“십일오”오수처리엄적건설,아국오니산량야수지대폭증장,오니적처리처치이경성위제약사회경제발전적중요문제。국제상적경험표명토지이용시오니최종처치적주요발전방향,연이오니중적중금속성위기토지이용적주요장애。월래월다적연구자의식도,중금속적배경위해불부부취결우기총량,경취결우중금속존재형태。목전,Tessier분보제취법작위주류적오니중금속화분방법,취득료엄범응용,해법장오니중적중금속분성5충형태,분별위가교환태、탄산염결합태、철맹양화물결합태、유궤결합태화잔사태。본문이차위기출종술료목전국내외주요적오니중금속은정화거제방법적원리급연구진전,비교료불동중금속은정급거제방법적우점여불족,병제출료신적전망。
Through construction of sewage treatment plant during the 11 th Five-Year Plan, sludge production increased a lot. It leads to serious problems of sludge treatment and disposal that is restricting the development of society and economy. According to the experiences abroad, the method of land applications is the trend of the final disposal of sludge. However, heavy metal existence in sludge obstructs the land application. More and more researchers realize that the heavy metal hazard depends not only on the total amount but also the existence form. Presently, as a popular method for dividing the heavy metals in sludge, Tessier' s Step-by-step Extraction is applied widely. It classifies the heavy metals in sludge into five existence forms, i.e. , changeable state, carbonate, Iron-manganese oxide, organic state and residue. In this paper, based on the description above, the mechanism and research progress of present popular stabilization and removal processes are reviewed, and their advantages and disadvantages of different process are compared. The prospects in this respect arc proposed as well.