深圳职业技术学院学报
深圳職業技術學院學報
심수직업기술학원학보
JOURNAL OF SHENZHEN POLYTECNIC
2012年
3期
13-17
,共5页
模糊控制%占空比%误差信号%BUCK%MATLAB
模糊控製%佔空比%誤差信號%BUCK%MATLAB
모호공제%점공비%오차신호%BUCK%MATLAB
fuzzy control%duty cycle%error signal%BUCK%MATLAB
与经典的PID控制器不同,模糊控制不需要获取系统精确的数学模型.根据系统的要求,设计模糊控制器,以给定参考电压与实际电压之间的偏差及其微分作为输入,通过合理的推理规则,得到占空比输出,去控制开关管的开关时间.论述了模糊控制器的详细设计过程,以及在MATLAB中建立仿真模型的过程.仿真结果表明系统具有较好的稳态和动态性能.
與經典的PID控製器不同,模糊控製不需要穫取繫統精確的數學模型.根據繫統的要求,設計模糊控製器,以給定參攷電壓與實際電壓之間的偏差及其微分作為輸入,通過閤理的推理規則,得到佔空比輸齣,去控製開關管的開關時間.論述瞭模糊控製器的詳細設計過程,以及在MATLAB中建立倣真模型的過程.倣真結果錶明繫統具有較好的穩態和動態性能.
여경전적PID공제기불동,모호공제불수요획취계통정학적수학모형.근거계통적요구,설계모호공제기,이급정삼고전압여실제전압지간적편차급기미분작위수입,통과합리적추리규칙,득도점공비수출,거공제개관관적개관시간.논술료모호공제기적상세설계과정,이급재MATLAB중건립방진모형적과정.방진결과표명계통구유교호적은태화동태성능.
The research of a DC-DC switched mode power supply based on fuzzy control, which is different from classic PID control, and does not require accurate mathematical model of system, is introduced. The fuzzy controller is designed according to the system's requirements. The error between the reference voltage and the practical output voltage, and the differential of error are set as the input of the controller. According to proper rules, the output of the controller-duty cycle is obtained to controller the switch. The design process and the simulation model in MATLAB of the fuzzy controller are introduced in detail. The simulation results show that the system works with good stability and dynamic properties.