CAJ | 학술논문

针对船载小口径天线的馈源设计需求,对一种新型组合馈源的馈电结构进行了模式分析,给出了一个环形口面辐射场的计算方法。通过优化提出了一个Ku频段线极化工作的组合馈源设计实例。经过CST优化仿真,组合馈源的反射板不到3个波长,且在馈源辐射波束半张角为90°时,主面边缘照射电平约为-10 dB。同时由于该组合馈源具有自支撑结构优点,因此非常适合应用于小口径、小焦径比的反射面天线。
침대선재소구경천선적궤원설계수구,대일충신형조합궤원적궤전결구진행료모식분석,급출료일개배형구면복사장적계산방법。통과우화제출료일개Ku빈단선겁화공작적조합궤원설계실례。경과CST우화방진,조합궤원적반사판불도3개파장,차재궤원복사파속반장각위90°시,주면변연조사전평약위-10 dB。동시유우해조합궤원구유자지탱결구우점,인차비상괄합응용우소구경、소초경비적반사면천선。
To fulfill the requirement of ship-borne small aperture reflector antenna feed, the field modes traveling through the waveguide of a new-type combined feed are analyzed. A method is also introduced for calculating the radiation pattern of ring-shaped radiating aperture. Finally, an effective linearly polarized combined feed design is presented in Ku-band. After simulation and optimization by using CST microwave studio,the sub-reflector dimensions of the combined feed are smaller than 3 wavelengths and the subtended half angle of the beam width is about 90 degrees for - 10 dB taper. Due to the advantages such as wide half angle of beam width and self-supported compact structure of this combined feed, it is extremely suitable to illuminate a main reflector with small aperture area and small f/D.