安徽科技学院学报
安徽科技學院學報
안휘과기학원학보
JOURNAL OF ANHUI SCIENCE AND TECHNOLOGY UNIVERSITY
2012年
2期
52-55
,共4页
装拆结构%耐磨性%密封
裝拆結構%耐磨性%密封
장탁결구%내마성%밀봉
Assembling and dismantling structures%Wear resistance%Seal
由于高速搅拌机中的主要损耗零件耐磨片要经常更换,而充填站的高速搅拌机在工作位置箱盖是打不开的,必须把搅拌机挪开。为了减少工作量,一方面不移动搅拌机就能更换耐磨片,把原来的上下箱装拆结构改成壳体加端盖的左右装拆结构,并对壳体内的零件结构做了适当调整;另一方面,提高转子耐磨片的耐磨性,延长它的使用寿命。左右装拆结构使得搅拌的液体容易泄露,对密封性能要求提高,重新设计了合适的密封结构。
由于高速攪拌機中的主要損耗零件耐磨片要經常更換,而充填站的高速攪拌機在工作位置箱蓋是打不開的,必鬚把攪拌機挪開。為瞭減少工作量,一方麵不移動攪拌機就能更換耐磨片,把原來的上下箱裝拆結構改成殼體加耑蓋的左右裝拆結構,併對殼體內的零件結構做瞭適噹調整;另一方麵,提高轉子耐磨片的耐磨性,延長它的使用壽命。左右裝拆結構使得攪拌的液體容易洩露,對密封性能要求提高,重新設計瞭閤適的密封結構。
유우고속교반궤중적주요손모령건내마편요경상경환,이충전참적고속교반궤재공작위치상개시타불개적,필수파교반궤나개。위료감소공작량,일방면불이동교반궤취능경환내마편,파원래적상하상장탁결구개성각체가단개적좌우장탁결구,병대각체내적령건결구주료괄당조정;령일방면,제고전자내마편적내마성,연장타적사용수명。좌우장탁결구사득교반적액체용역설로,대밀봉성능요구제고,중신설계료합괄적밀봉결구。
Due to major losses in a high - speed mixer parts wear - resistant to frequently change, the filling sta- tion high speed mixer in place of cover is not open, audit must be moved. In order to reduce the workload the mixer will be able to replace the wear on the one hand, splitting tank up and down the original structure into a shell and cover about assembling and dismantling of structures, and parts of the shell structure make the appro- pilate adjustments; on the other hand, improve the wear resistance of wear of the rotor, and extend the life Of it. About Assembly and disassembly structure allows mixing of liquid easy to leak, increasing demands on sealing performance, and proper sealing structure has been redesigned.