表面技术
錶麵技術
표면기술
SURFACE TECHNOLOGY
2009年
5期
26-28
,共3页
罗来马%罗娟%刘少光%俞佳%郦剑
囉來馬%囉娟%劉少光%俞佳%酈劍
라래마%라연%류소광%유가%역검
高速电弧喷涂%ZrO2陶瓷相%FeMnCr/ZrO2复合涂层%组织%抗热震性
高速電弧噴塗%ZrO2陶瓷相%FeMnCr/ZrO2複閤塗層%組織%抗熱震性
고속전호분도%ZrO2도자상%FeMnCr/ZrO2복합도층%조직%항열진성
为了研究FeMnCr/ZrO2复合涂层的抗热震性能及失效机理,采用高速电弧喷涂技术在20#钢表面制备了FeMnCr/ZrO2复合涂层.利用光学显微镜(OM)、场发射扫描电子显微镜(FE-SEM)、能谱分析(EDS)等方法分析表征了复合涂层的微观组织和抗热震性能.试验结果表明:ZrO2陶瓷相以游离态团状形式存在于涂层中,游离态团状中ZrO2晶粒呈"马赛克"结构均匀分布;FeMnCr/ZrO2复合涂层热震过程中,涂层氧化起源于层间结合处,且沿着金属结晶相以"网状"形式向内扩展.热震破坏形式为涂层从基体上整体脱落,但是涂层表面无裂纹出现.
為瞭研究FeMnCr/ZrO2複閤塗層的抗熱震性能及失效機理,採用高速電弧噴塗技術在20#鋼錶麵製備瞭FeMnCr/ZrO2複閤塗層.利用光學顯微鏡(OM)、場髮射掃描電子顯微鏡(FE-SEM)、能譜分析(EDS)等方法分析錶徵瞭複閤塗層的微觀組織和抗熱震性能.試驗結果錶明:ZrO2陶瓷相以遊離態糰狀形式存在于塗層中,遊離態糰狀中ZrO2晶粒呈"馬賽剋"結構均勻分佈;FeMnCr/ZrO2複閤塗層熱震過程中,塗層氧化起源于層間結閤處,且沿著金屬結晶相以"網狀"形式嚮內擴展.熱震破壞形式為塗層從基體上整體脫落,但是塗層錶麵無裂紋齣現.
위료연구FeMnCr/ZrO2복합도층적항열진성능급실효궤리,채용고속전호분도기술재20#강표면제비료FeMnCr/ZrO2복합도층.이용광학현미경(OM)、장발사소묘전자현미경(FE-SEM)、능보분석(EDS)등방법분석표정료복합도층적미관조직화항열진성능.시험결과표명:ZrO2도자상이유리태단상형식존재우도층중,유리태단상중ZrO2정립정"마새극"결구균균분포;FeMnCr/ZrO2복합도층열진과정중,도층양화기원우층간결합처,차연착금속결정상이"망상"형식향내확전.열진파배형식위도층종기체상정체탈락,단시도층표면무렬문출현.