稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2009年
11期
1916-1919
,共4页
陈绍楷%田弋纬%常璐%苗壮%夏金华
陳紹楷%田弋緯%常璐%苗壯%夏金華
진소해%전익위%상로%묘장%하금화
钛合金%相变温度%差熟分析
鈦閤金%相變溫度%差熟分析
태합금%상변온도%차숙분석
titanium alloy%phase transformation temperature%differential thermal analysis
以α型钛合金TA7、α+β型两相钛合金TC4及近β型钛合金Ti-1023为例,对比研究了金相法和差热分析法测定钛合金α+β/β相转变温度的一致性问题.结果表明:α型钛合金TA7发生相变时,DSC曲线上产生1个明显的吸热峰,其涉及的温度范围约60℃,当定义DSC曲线的一阶导数的峰值为相变温度时,所测得的相变温度与金相法的很接近;α+β型两相钛合金TC4和近β型钛合金Ti-1023发生相变时,DSC曲线仅表现为基线偏移,涉及的温度范围10~15℃,由DSC曲线一阶导数峰值定义的相变温度与金相法符合得很好.
以α型鈦閤金TA7、α+β型兩相鈦閤金TC4及近β型鈦閤金Ti-1023為例,對比研究瞭金相法和差熱分析法測定鈦閤金α+β/β相轉變溫度的一緻性問題.結果錶明:α型鈦閤金TA7髮生相變時,DSC麯線上產生1箇明顯的吸熱峰,其涉及的溫度範圍約60℃,噹定義DSC麯線的一階導數的峰值為相變溫度時,所測得的相變溫度與金相法的很接近;α+β型兩相鈦閤金TC4和近β型鈦閤金Ti-1023髮生相變時,DSC麯線僅錶現為基線偏移,涉及的溫度範圍10~15℃,由DSC麯線一階導數峰值定義的相變溫度與金相法符閤得很好.
이α형태합금TA7、α+β형량상태합금TC4급근β형태합금Ti-1023위례,대비연구료금상법화차열분석법측정태합금α+β/β상전변온도적일치성문제.결과표명:α형태합금TA7발생상변시,DSC곡선상산생1개명현적흡열봉,기섭급적온도범위약60℃,당정의DSC곡선적일계도수적봉치위상변온도시,소측득적상변온도여금상법적흔접근;α+β형량상태합금TC4화근β형태합금Ti-1023발생상변시,DSC곡선부표현위기선편이,섭급적온도범위10~15℃,유DSC곡선일계도수봉치정의적상변온도여금상법부합득흔호.