浙江化工
浙江化工
절강화공
ZHEJIANG CHEMICAL INDUSTRY
2012年
4期
6-9
,共4页
硅油%制备%乳化剂
硅油%製備%乳化劑
규유%제비%유화제
silicone%preparation%emulsifie
以1 000 mPa.s硅油为主要原料,选用非离子型表面活性剂（span-60和tween-60的质量比为0.43：0.57）为复合乳化剂,复配乳化剂含量为硅油的50%,采用转相乳化法,乳化温度80℃,乳化时间60 min,制备了硅油含量为30%的二甲基乳化硅油,其外观为均匀、细腻的乳白色黏性液体。
以1 000 mPa.s硅油為主要原料,選用非離子型錶麵活性劑（span-60和tween-60的質量比為0.43：0.57）為複閤乳化劑,複配乳化劑含量為硅油的50%,採用轉相乳化法,乳化溫度80℃,乳化時間60 min,製備瞭硅油含量為30%的二甲基乳化硅油,其外觀為均勻、細膩的乳白色黏性液體。
이1 000 mPa.s규유위주요원료,선용비리자형표면활성제（span-60화tween-60적질량비위0.43：0.57）위복합유화제,복배유화제함량위규유적50%,채용전상유화법,유화온도80℃,유화시간60 min,제비료규유함량위30%적이갑기유화규유,기외관위균균、세니적유백색점성액체。
A silicone oil emulsion was prepared by using silicone oil with viscosity of 1000 mPa·s as main material.Non-ionic surfactant（span-60：tween-60 by the mass ratio of 0.43：0.57 mixture） as mixed emulsifier.The reparation with dosage of blended emulsifier is 50% of silicone,the emulsification takes time of 60 min and the temperature of 80 ℃,the silicone oil content in the emulsion achieved 30% under these conditions.The appearance of the emulsion is uniform and with an exquisite texture.
