冶金分析
冶金分析
야금분석
METALLURGICAL ANALYSIS
2012年
11期
36-39
,共4页
赵登山%高明%高强%孙永明
趙登山%高明%高彊%孫永明
조등산%고명%고강%손영명
阻抑动力学光度法%溴酸钾%中性红%Fe(Ⅲ)
阻抑動力學光度法%溴痠鉀%中性紅%Fe(Ⅲ)
조억동역학광도법%추산갑%중성홍%Fe(Ⅲ)
在H2SO4介质中,加热80℃条件下,Fe(Ⅲ)对溴酸钾氧化中性红褪色反应具有较强的阻抑作用,基于在波长520 nm处Fe(Ⅲ)的量与阻抑反应体系(吸光度为A)和非阻抑反应体系(吸光度为A0)吸光度差值呈线性关系,建立了阻抑褪色动力学光度法测定痕量Fe(Ⅲ)的分析方法.在优化实验条件下,方法的线性范围为0.000 4~0.064 μg/mL,检出限为1.41×10-4μg/mL.测定了动力学参数,该阻抑反应为准一级反应,表观速率常数k=4.53×10-4 s-1,表观活化能为69.25 kJ/mol.方法用于天然水中痕量铁的测定,标准加入回收率为99.0%~99.5%;RSD为3.8%~6.2%.
在H2SO4介質中,加熱80℃條件下,Fe(Ⅲ)對溴痠鉀氧化中性紅褪色反應具有較彊的阻抑作用,基于在波長520 nm處Fe(Ⅲ)的量與阻抑反應體繫(吸光度為A)和非阻抑反應體繫(吸光度為A0)吸光度差值呈線性關繫,建立瞭阻抑褪色動力學光度法測定痕量Fe(Ⅲ)的分析方法.在優化實驗條件下,方法的線性範圍為0.000 4~0.064 μg/mL,檢齣限為1.41×10-4μg/mL.測定瞭動力學參數,該阻抑反應為準一級反應,錶觀速率常數k=4.53×10-4 s-1,錶觀活化能為69.25 kJ/mol.方法用于天然水中痕量鐵的測定,標準加入迴收率為99.0%~99.5%;RSD為3.8%~6.2%.
재H2SO4개질중,가열80℃조건하,Fe(Ⅲ)대추산갑양화중성홍퇴색반응구유교강적조억작용,기우재파장520 nm처Fe(Ⅲ)적량여조억반응체계(흡광도위A)화비조억반응체계(흡광도위A0)흡광도차치정선성관계,건립료조억퇴색동역학광도법측정흔량Fe(Ⅲ)적분석방법.재우화실험조건하,방법적선성범위위0.000 4~0.064 μg/mL,검출한위1.41×10-4μg/mL.측정료동역학삼수,해조억반응위준일급반응,표관속솔상수k=4.53×10-4 s-1,표관활화능위69.25 kJ/mol.방법용우천연수중흔량철적측정,표준가입회수솔위99.0%~99.5%;RSD위3.8%~6.2%.