科学技术与工程
科學技術與工程
과학기술여공정
SCIENCE TECHNOLOGY AND ENGINEERING
2013年
34期
10129-10135,10141
,共8页
冲击地压%保护层开采%围岩应力演化%数值模拟
遲擊地壓%保護層開採%圍巖應力縯化%數值模擬
충격지압%보호층개채%위암응력연화%수치모의
rockburst%protective seam mining%stress evolution rule of surrounding rock numerical simulation
分析了冲中击煤层上保护层开采过程中围岩应力演化规律.研究表明:在工作面开采前方0~20m范围煤岩体内纵向压力处于增长阶段,应力集中系数达到2.0.在20 ~ 60 m为纵向压力逐步恢复阶段,应力集中系数达到1.7,应力集中峰值出现在工作面前方5 m处左右.工作面开采50 m之后,超前支撑压力有规律地呈现两次应力集中和两次应力释放现象.分析了保护层采空区及工作面下覆不同垂直高度处围岩应力随煤层开采进度演化规律,指出采空区纵向应力随采空区深入,呈现逐步增大趋势.在采空区两侧下方被保护层应力值升高幅度要大于其中间区域,保护层工作面的压实作用传递到被保护层工作面在空间上稍微滞后,这个滞后的距离在30 ~40 m.
分析瞭遲中擊煤層上保護層開採過程中圍巖應力縯化規律.研究錶明:在工作麵開採前方0~20m範圍煤巖體內縱嚮壓力處于增長階段,應力集中繫數達到2.0.在20 ~ 60 m為縱嚮壓力逐步恢複階段,應力集中繫數達到1.7,應力集中峰值齣現在工作麵前方5 m處左右.工作麵開採50 m之後,超前支撐壓力有規律地呈現兩次應力集中和兩次應力釋放現象.分析瞭保護層採空區及工作麵下覆不同垂直高度處圍巖應力隨煤層開採進度縯化規律,指齣採空區縱嚮應力隨採空區深入,呈現逐步增大趨勢.在採空區兩側下方被保護層應力值升高幅度要大于其中間區域,保護層工作麵的壓實作用傳遞到被保護層工作麵在空間上稍微滯後,這箇滯後的距離在30 ~40 m.
분석료충중격매층상보호층개채과정중위암응력연화규률.연구표명:재공작면개채전방0~20m범위매암체내종향압력처우증장계단,응력집중계수체도2.0.재20 ~ 60 m위종향압력축보회복계단,응력집중계수체도1.7,응력집중봉치출현재공작면전방5 m처좌우.공작면개채50 m지후,초전지탱압력유규률지정현량차응력집중화량차응력석방현상.분석료보호층채공구급공작면하복불동수직고도처위암응력수매층개채진도연화규률,지출채공구종향응력수채공구심입,정현축보증대추세.재채공구량측하방피보호층응력치승고폭도요대우기중간구역,보호층공작면적압실작용전체도피보호층공작면재공간상초미체후,저개체후적거리재30 ~40 m.