膜科学与技术
膜科學與技術
막과학여기술
MEMBRANE SCIENCE AND TECHNOLOGY
2012年
6期
76-81
,共6页
张瑛洁%曹天静%李大鹏%林茹%杨榕%马军
張瑛潔%曹天靜%李大鵬%林茹%楊榕%馬軍
장영길%조천정%리대붕%림여%양용%마군
聚偏氟乙烯(PVDF)%中空纤维膜%制备%表征
聚偏氟乙烯(PVDF)%中空纖維膜%製備%錶徵
취편불을희(PVDF)%중공섬유막%제비%표정
采用干—湿相转化法制备Fe(Ⅲ)-Cu(Ⅱ)/PVDF中空纤维抗污染膜,讨论了不同添加剂量的变化及不同的工艺参数对膜性能的影响.通过扫描电子显微镜、水通量测定仪、机械强度测定仪、接触角测定仪分别对膜的微观结构、水通量、抗污染性、机械强度、接触角进行联合表征,分析不同因素对膜性能的影响趋势.结果表明:随着PVDF粉加入量、无机掺杂物质的量、添加剂的量的增加,膜的纯水通量均呈降低趋势,但截留率、拉伸强度、亲水性、及抗污染性能均随变化而增大;随着膜制备的工艺参数——纺丝速度、凝固浴温度的增加,膜的纯水通量增大,而截留率呈下降趋势,膜的拉伸性能得到提高;随着膜制备的工艺参数——干程距离的增大,膜的纯水通量和截留率分别呈现出增大和减小的趋势,膜的孔隙率和拉伸强度及断裂伸长率先增大后减小.
採用榦—濕相轉化法製備Fe(Ⅲ)-Cu(Ⅱ)/PVDF中空纖維抗汙染膜,討論瞭不同添加劑量的變化及不同的工藝參數對膜性能的影響.通過掃描電子顯微鏡、水通量測定儀、機械彊度測定儀、接觸角測定儀分彆對膜的微觀結構、水通量、抗汙染性、機械彊度、接觸角進行聯閤錶徵,分析不同因素對膜性能的影響趨勢.結果錶明:隨著PVDF粉加入量、無機摻雜物質的量、添加劑的量的增加,膜的純水通量均呈降低趨勢,但截留率、拉伸彊度、親水性、及抗汙染性能均隨變化而增大;隨著膜製備的工藝參數——紡絲速度、凝固浴溫度的增加,膜的純水通量增大,而截留率呈下降趨勢,膜的拉伸性能得到提高;隨著膜製備的工藝參數——榦程距離的增大,膜的純水通量和截留率分彆呈現齣增大和減小的趨勢,膜的孔隙率和拉伸彊度及斷裂伸長率先增大後減小.
채용간—습상전화법제비Fe(Ⅲ)-Cu(Ⅱ)/PVDF중공섬유항오염막,토론료불동첨가제량적변화급불동적공예삼수대막성능적영향.통과소묘전자현미경、수통량측정의、궤계강도측정의、접촉각측정의분별대막적미관결구、수통량、항오염성、궤계강도、접촉각진행연합표정,분석불동인소대막성능적영향추세.결과표명:수착PVDF분가입량、무궤참잡물질적량、첨가제적량적증가,막적순수통량균정강저추세,단절류솔、랍신강도、친수성、급항오염성능균수변화이증대;수착막제비적공예삼수——방사속도、응고욕온도적증가,막적순수통량증대,이절류솔정하강추세,막적랍신성능득도제고;수착막제비적공예삼수——간정거리적증대,막적순수통량화절류솔분별정현출증대화감소적추세,막적공극솔화랍신강도급단렬신장솔선증대후감소.