CAJ | 학술논문

提出了基于TSMC 0.18μm RF CMOS工艺带温度补偿高精度振荡器的设计方案。针对射频电子标签应用的设计要求，选用改进型的双电容张弛振荡器结构。通过温度补偿作用，参考电压与输出电流受电源影响较小，保证了振荡器输出频率的稳定性。使用SPECTRE工具对电路进行仿真，在1.8 V电源电压下，-25～100℃范围内，中心频率为1.92 MHz时最大偏差小于±0.75%，达到使用的要求，并在此基础上完成电路的版图。
제출료기우TSMC 0.18μm RF CMOS공예대온도보상고정도진탕기적설계방안。침대사빈전자표첨응용적설계요구，선용개진형적쌍전용장이진탕기결구。통과온도보상작용，삼고전압여수출전류수전원영향교소，보증료진탕기수출빈솔적은정성。사용SPECTRE공구대전로진행방진，재1.8 V전원전압하，-25～100℃범위내，중심빈솔위1.92 MHz시최대편차소우±0.75%，체도사용적요구，병재차기출상완성전로적판도。
Based on TSMC′s 0.18 μm RF CMOS process,a desidn scheme of high-accuracy oscillator with temperature compensation is presented. A structure of the improved double-capacitor relaxation oscillator was chosen to meet the design re-quirements of the RFID tags. In order to guarantee the stability of the oscillator output frequency,the temperature compensation technology was adopted in the oscillator to minimize the effect of power surply on reference voltage and output current. The SPECTRE tool was used for circuit simulation. The result indicates that the maximum frequency deviation is less than ±0.75% at 1.92 MHz center frequency when the circuit works at 1.8 V and the temperature range is -25~100 ℃. It meets the application re-quirement. On the basis of the simulation,the layout diagram was accomplished.