CAJ | 학술논문

针对当前工厂仓库火灾事故频繁发生，设计了一种工厂仓库火灾预警系统。该系统由火灾检测模块与中心接收模块组成，火灾检测模块利用以STM32为控制核心的智能小车在工厂仓库“巡逻”，通过加装OV7670图像传感器检测火焰，一旦发现火灾事故发生，立即无线发送预警信息，信息由中心接收模块接收后通过RS 232串口传送给PC机，PC机采取相应救灾措施。实际测试表明，本系统发出预警信息的成功率高，近100%，零误判，时间短。
침대당전공엄창고화재사고빈번발생，설계료일충공엄창고화재예경계통。해계통유화재검측모괴여중심접수모괴조성，화재검측모괴이용이STM32위공제핵심적지능소차재공엄창고“순라”，통과가장OV7670도상전감기검측화염，일단발현화재사고발생，립즉무선발송예경신식，신식유중심접수모괴접수후통과RS 232천구전송급PC궤，PC궤채취상응구재조시。실제측시표명，본계통발출예경신식적성공솔고，근100%，령오판，시간단。
A factory warehouse fire system was designed for the frequent occurrence of the factory warehouse fire accidents. This system is composed of fire detection module and central receiver module. The fire detection module takes STM32 micropro-cessor as master control of the smart car patrolling around the factory warehouse to detect flame by OV7670 image sensor and send the warning information by wireless RF system when discovering fire accident. The central receiver module receives the in-formation and transmits it to PC through RS 232 serial port to adopt the corresponding relief measures. The practical testing re-sult indicates that the system has a nearly 100% success rate in sending warning information.