CAJ | 학술논문

为解决传统钢制大型天线辐射梁单元重量大、重复安装精度差、易腐蚀等问题，采用钢制球形接头与碳纤维复合材料管材胶接组合的方式，对复合材料管材和胶接接头进行了合理设计，成功制造出某大型天线轻质复合材料辐射梁单元。对此辐射梁单元进行了有限元分析与实测研究，能够很好地满足天线使用要求。结果表明：与传统的钢制辐射梁单元相比，复合材料天线辐射梁单元减重50％左右，辐射梁刚度好、强度大，安装一致性好、精度高，特别适合重复安装的大型天线。
위해결전통강제대형천선복사량단원중량대、중복안장정도차、역부식등문제，채용강제구형접두여탄섬유복합재료관재효접조합적방식，대복합재료관재화효접접두진행료합리설계，성공제조출모대형천선경질복합재료복사량단원。대차복사량단원진행료유한원분석여실측연구，능구흔호지만족천선사용요구。결과표명：여전통적강제복사량단원상비，복합재료천선복사량단원감중50％좌우，복사량강도호、강도대，안장일치성호、정도고，특별괄합중복안장적대형천선。
Abstract： To solve the problems of steel radial beam, such as heavy weight, low repeated installation accura- cy, corrosive, lightweight composite material radial beam unit of some sort of large antenna has been made by adopting the bonding of carbon fiber composite pipe with steel spherical joint and the rational design of com- posite pipes and bonding joints. Finite element analysis and actual tests of the lightweight composite material radial beam unit of antenna are carried out in this paper. The results indicate that compared with steel radial beam, lightweight composite material radial beam has 50% weight decrease, higher stiffness, strength and precision. It is especially suitable for the large antenna which is installed repetitively and can fully meet the antenna application requirements.