兵工学报
兵工學報
병공학보
ACTA ARMAMENTARII
2012年
11期
1281-1285
,共5页
机械设计%上架%拓扑优化%尺寸优化%传力路径
機械設計%上架%拓撲優化%呎吋優化%傳力路徑
궤계설계%상가%탁복우화%척촌우화%전력로경
为解决某火炮上架刚度较差问题,利用基于传力路径下的结构优化设计方法,进行了上架改进设计.通过有限元静态刚强度计算,分析了原上架设计中的薄弱环节.运用拓扑优化方法找到结构的主传力路径,寻求最佳材料分布,修改了上架筋板布局.采用尺寸优化方法进行详细设计,确定了上架主要板件的厚度尺寸.对改进前后上架结构的刚强度进行了对比和分析,结果表明改进设计的上架刚度有较大幅度提高,最大位移减小了32.7%,左右耳轴室中心变位差减小了52.1%,且最大应力降低20.0%,而结构质量仅增加了1.9 kg,达到了改进设计目标.
為解決某火砲上架剛度較差問題,利用基于傳力路徑下的結構優化設計方法,進行瞭上架改進設計.通過有限元靜態剛彊度計算,分析瞭原上架設計中的薄弱環節.運用拓撲優化方法找到結構的主傳力路徑,尋求最佳材料分佈,脩改瞭上架觔闆佈跼.採用呎吋優化方法進行詳細設計,確定瞭上架主要闆件的厚度呎吋.對改進前後上架結構的剛彊度進行瞭對比和分析,結果錶明改進設計的上架剛度有較大幅度提高,最大位移減小瞭32.7%,左右耳軸室中心變位差減小瞭52.1%,且最大應力降低20.0%,而結構質量僅增加瞭1.9 kg,達到瞭改進設計目標.
위해결모화포상가강도교차문제,이용기우전력로경하적결구우화설계방법,진행료상가개진설계.통과유한원정태강강도계산,분석료원상가설계중적박약배절.운용탁복우화방법조도결구적주전력로경,심구최가재료분포,수개료상가근판포국.채용척촌우화방법진행상세설계,학정료상가주요판건적후도척촌.대개진전후상가결구적강강도진행료대비화분석,결과표명개진설계적상가강도유교대폭도제고,최대위이감소료32.7%,좌우이축실중심변위차감소료52.1%,차최대응력강저20.0%,이결구질량부증가료1.9 kg,체도료개진설계목표.