应用科技
應用科技
응용과기
YING YONG KE JI
2013年
2期
30-34
,共5页
李创%刘兆吉%吴冰%杨军%苑立波
李創%劉兆吉%吳冰%楊軍%苑立波
리창%류조길%오빙%양군%원립파
光纤端%微加工系统%研磨%圆锥角%楔角
光纖耑%微加工繫統%研磨%圓錐角%楔角
광섬단%미가공계통%연마%원추각%설각
optical fiber end%microfabrication system%grinding%cone%wedge
围绕光纤端微加工技术与系统的设计、制作,以及光纤端加工实验展开研究,完成光纤端微加工整体系统设计并进行加工,利用本实验设计制作的光纤端微加工系统,对楔角光纤端、圆锥光纤端进行研磨实验。实验结果表明:光纤端微加工系统可以完成对不同形状的光纤端面的加工。圆锥角加工范围为30°~90°,加工精度为±1°;楔角加工范围为20°~50°,加工精度为±2°。光纤端微加工系统能够达到高精度、多功能、操作简便、易于控制的设计要求。
圍繞光纖耑微加工技術與繫統的設計、製作,以及光纖耑加工實驗展開研究,完成光纖耑微加工整體繫統設計併進行加工,利用本實驗設計製作的光纖耑微加工繫統,對楔角光纖耑、圓錐光纖耑進行研磨實驗。實驗結果錶明:光纖耑微加工繫統可以完成對不同形狀的光纖耑麵的加工。圓錐角加工範圍為30°~90°,加工精度為±1°;楔角加工範圍為20°~50°,加工精度為±2°。光纖耑微加工繫統能夠達到高精度、多功能、操作簡便、易于控製的設計要求。
위요광섬단미가공기술여계통적설계、제작,이급광섬단가공실험전개연구,완성광섬단미가공정체계통설계병진행가공,이용본실험설계제작적광섬단미가공계통,대설각광섬단、원추광섬단진행연마실험。실험결과표명:광섬단미가공계통가이완성대불동형상적광섬단면적가공。원추각가공범위위30°~90°,가공정도위±1°;설각가공범위위20°~50°,가공정도위±2°。광섬단미가공계통능구체도고정도、다공능、조작간편、역우공제적설계요구。
10.3969/j.issn.1007-7043.201202006