中国光学
中國光學
중국광학
CHINESE JOURNAL OF OPTICS
2012年
5期
520-524
,共5页
发光二极管(LED)%非成像光学%复合抛物面反射器(CPC)%LED路灯%光学设计
髮光二極管(LED)%非成像光學%複閤拋物麵反射器(CPC)%LED路燈%光學設計
발광이겁관(LED)%비성상광학%복합포물면반사기(CPC)%LED로등%광학설계
Light Emitting Diode (LED)%nonimaging optics%Compound Parabolic Concentrator ( CPC )%LEDstreet lamp%optical design
设计了一组合式路灯反射器,以使发光二极管(LED)路灯在道路照明时产生矩形光斑和均匀照度。在非成像光学基础上,利用复合抛物面的高性能集光作用和机械设计软件的强大作图功能,设计了一款分段组合复合抛物面反射器(CPC)。基于“边缘光线原理”和”裁剪法”,此款反射器能将朗伯型发光的LED光束整形为近似矩形分布,出光效率达96%以上。理论模拟证明:在高度为10m,范围为10m×30m内利用此反射器进行二次配光的LED路灯的照度均匀度达0.5以上。该反射式LED路灯光束整形器结构简单,光学效率高、成本低廉,模拟结果完全达到了目前我国国家道路照明规范要求。
設計瞭一組閤式路燈反射器,以使髮光二極管(LED)路燈在道路照明時產生矩形光斑和均勻照度。在非成像光學基礎上,利用複閤拋物麵的高性能集光作用和機械設計軟件的彊大作圖功能,設計瞭一款分段組閤複閤拋物麵反射器(CPC)。基于“邊緣光線原理”和”裁剪法”,此款反射器能將朗伯型髮光的LED光束整形為近似矩形分佈,齣光效率達96%以上。理論模擬證明:在高度為10m,範圍為10m×30m內利用此反射器進行二次配光的LED路燈的照度均勻度達0.5以上。該反射式LED路燈光束整形器結構簡單,光學效率高、成本低廉,模擬結果完全達到瞭目前我國國傢道路照明規範要求。
설계료일조합식로등반사기,이사발광이겁관(LED)로등재도로조명시산생구형광반화균균조도。재비성상광학기출상,이용복합포물면적고성능집광작용화궤계설계연건적강대작도공능,설계료일관분단조합복합포물면반사기(CPC)。기우“변연광선원리”화”재전법”,차관반사기능장랑백형발광적LED광속정형위근사구형분포,출광효솔체96%이상。이론모의증명:재고도위10m,범위위10m×30m내이용차반사기진행이차배광적LED로등적조도균균도체0.5이상。해반사식LED로등광속정형기결구간단,광학효솔고、성본저렴,모의결과완전체도료목전아국국가도로조명규범요구。
A combined reflector for Light Emitting Diode (LED) street lamps is designed to produce a rectan- light spot and uniform lighting in the road, as well as having a simple structure and high light efficiency. on the principles of non-imaging optics and mechanical design software, a segmented compound para- reflector was designed. The reflecting beams of light from the reflector have an approximately rectangular distribution while the light efficiency can reach 96%. The analysis and simulation results show that the uni- fortuity of illuminance can reach 0. 5 over an area of 10 m ~ 30 m when the LED lamp is installed at a height of 10 m. The reflector design when applied to shaping the LED beam into the rectangle shape has a high opti- cal efficiency and low costs. The simulation results show that it can satisfy the current requirement for road lighting.