汽车实用技术
汽車實用技術
기차실용기술
PRACTICAL TECHNOLOGY OF AUTOMOBILE
2012年
10期
41-44
,共4页
泮战侠%白培谦%肖理%王庆国
泮戰俠%白培謙%肖理%王慶國
반전협%백배겸%초리%왕경국
中央充放气铜管%应力腐蚀裂纹%去应力退火
中央充放氣銅管%應力腐蝕裂紋%去應力退火
중앙충방기동관%응력부식렬문%거응력퇴화
Central charge and discharge gas brass%Stress corrosion cracking%To stress annealing
通过对中央充放气铜管宏观检查、化学成分分析、硬度测试、氨熏试验等结果分析,确定了其开裂原因是由于工件冷变形后未消除残余应力,加之装配后产生的应力,在露天放置又受到大气雨水等共同作用,形成了腐蚀环境,导致产生应力腐蚀裂纹。并提出了去应力退火预防中央充放气铜管开裂,效果良好。
通過對中央充放氣銅管宏觀檢查、化學成分分析、硬度測試、氨熏試驗等結果分析,確定瞭其開裂原因是由于工件冷變形後未消除殘餘應力,加之裝配後產生的應力,在露天放置又受到大氣雨水等共同作用,形成瞭腐蝕環境,導緻產生應力腐蝕裂紋。併提齣瞭去應力退火預防中央充放氣銅管開裂,效果良好。
통과대중앙충방기동관굉관검사、화학성분분석、경도측시、안훈시험등결과분석,학정료기개렬원인시유우공건랭변형후미소제잔여응력,가지장배후산생적응력,재로천방치우수도대기우수등공동작용,형성료부식배경,도치산생응력부식렬문。병제출료거응력퇴화예방중앙충방기동관개렬,효과량호。
Central charge bleed brass macroscopic examination,chemical composition analysis,hardness testing,Ammonia test results,to determine the cause of the cracking is due to cold deformation of the workpiece does not eliminate the residual stress,coupled with the stress resulting assembly in the open airplace but also by the joint action of the atmospheric rain,etc.,to form a corrosive environment,resulting in stress corrosion cracking.And to stress annealing to prevent central charge and deflated brass cracking good effect.