河北化工
河北化工
하북화공
HEBEI CHEMICAL ENGINEERING AND INDUSTRY
2012年
8期
56-59
,共4页
石连强%张娟%侯晓燕%王婷婷%徐海斌%霍晓月%赵地顺
石連彊%張娟%侯曉燕%王婷婷%徐海斌%霍曉月%趙地順
석련강%장연%후효연%왕정정%서해빈%곽효월%조지순
竹炭%TiO2%二苯并噻吩%光催化氧化
竹炭%TiO2%二苯併噻吩%光催化氧化
죽탄%TiO2%이분병새분%광최화양화
bamboo charcoals%TiO2%dibenzothiophene%photocatalytie oxidation
研究了浸渍法制备的竹炭(BC)负载TiO2光催化氧化氧化二苯并噻吩(DBT)。对其反应工艺条件(如光催化剂用量、双氧水浓度和TiO2的负载量)进行优化。结果表明负载型TiO2/BC提高了TiO2的分散度,比纯TiO2表现出更好的光催化活性。反应条件为燃料油氧化脱硫的发展提供理论参考。所得结果为:TiO2负载量15%(wt%)、H2O2的浓度O/S为14mol、催化剂用量为0.002g/mL模型硫化物。在最佳条件下反应2h,DBT脱硫率高达66%。此结果为燃料油的氧化脱硫技术的发展提供了理论参考。
研究瞭浸漬法製備的竹炭(BC)負載TiO2光催化氧化氧化二苯併噻吩(DBT)。對其反應工藝條件(如光催化劑用量、雙氧水濃度和TiO2的負載量)進行優化。結果錶明負載型TiO2/BC提高瞭TiO2的分散度,比純TiO2錶現齣更好的光催化活性。反應條件為燃料油氧化脫硫的髮展提供理論參攷。所得結果為:TiO2負載量15%(wt%)、H2O2的濃度O/S為14mol、催化劑用量為0.002g/mL模型硫化物。在最佳條件下反應2h,DBT脫硫率高達66%。此結果為燃料油的氧化脫硫技術的髮展提供瞭理論參攷。
연구료침지법제비적죽탄(BC)부재TiO2광최화양화양화이분병새분(DBT)。대기반응공예조건(여광최화제용량、쌍양수농도화TiO2적부재량)진행우화。결과표명부재형TiO2/BC제고료TiO2적분산도,비순TiO2표현출경호적광최화활성。반응조건위연료유양화탈류적발전제공이론삼고。소득결과위:TiO2부재량15%(wt%)、H2O2적농도O/S위14mol、최화제용량위0.002g/mL모형류화물。재최가조건하반응2h,DBT탈류솔고체66%。차결과위연료유적양화탈류기술적발전제공료이론삼고。
To study photocatalytic oxidation of dibenzothiophene (DBT) using TiO2-loaded bamboo charcoals (BC) prepared by wet impregnation. To investigate technological conditions (the amount of photocatalysts, hydrogen per-oxide,and TiO2 loading). The results show that TiO2/BC improves the dispersed degree of TiO2 catalyst, which shows a better photocatalytic performance than pure TiO2. The optimum reaction conditions are amount of loaded TiO2 15% (wt%), H2 02 concentration O/S 14 (tool) and amount of TiO2/BC 0. 002 g/mL model diesel. Removal ratio of DBT is up to 66% under optimum reaction conditions. To obtain the refe-rence for the development of an ox-idative desulfurization process for fuel oils.