CAJ | 학술논문

利用阶跃阻抗谐振器（SIR）结构设计波导带通滤波器。该方法减小体积，又可以将杂散谐振频率向高端推移．从而增加阻带宽度，使得结构的设计获得很大的自由。最后，利用电磁场仿真软件对结构尺寸进行优化仿真，并实际制作一个中心频率为780MHz（通带差损小于0．7dB）的SIR带通滤波器。实测结果和仿真结果吻合良好．达到预计指标参数。该滤波器具有体积小，结构简单易于加工等优点。
이용계약조항해진기（SIR）결구설계파도대통려파기。해방법감소체적，우가이장잡산해진빈솔향고단추이．종이증가조대관도，사득결구적설계획득흔대적자유。최후，이용전자장방진연건대결구척촌진행우화방진，병실제제작일개중심빈솔위780MHz（통대차손소우0．7dB）적SIR대통려파기。실측결과화방진결과문합량호．체도예계지표삼수。해려파기구유체적소，결구간단역우가공등우점。
A novel stepped impedance structure （SIR） structure is applied to the waveguide bandpass filter design in this paper. The volume would be reduced and the stop-band could be widen while more freedom could be obtained in the structure design. Finally, the size of structure can be simulated and modified by using electromagnetic software. A center frequency of 780 MHz has been fabricated and measured using the proposed method, and the insertion loss in the passband is lower than 0.7 dB. and the results measured by experiment are in good agreement with that of simulation. The compact waveguide filter has many advantages such as small size, simple structure and facilitate processing.