CAJ | 학술논문

本文讨论了Fe50Cu50复合粉体机械合金化后的形貌及固溶情况，通过对机械合金化后Fe50Cu50复合粉体进行扫描电镜和面分布分析确定了其形貌以及Fe和Cu的固溶情况。实验结果表明：球磨50h后，Fe50Cu50复合粉体颗粒尺寸基本稳定，大小在几个微米左右，且 Fe和Cu已经充分的融合在一起形成了均匀的固溶体。
본문토론료Fe50Cu50복합분체궤계합금화후적형모급고용정황，통과대궤계합금화후Fe50Cu50복합분체진행소묘전경화면분포분석학정료기형모이급Fe화Cu적고용정황。실험결과표명：구마50h후，Fe50Cu50복합분체과립척촌기본은정，대소재궤개미미좌우，차 Fe화Cu이경충분적융합재일기형성료균균적고용체。
This paper discusses Fe50Cu50 composite powder mechanical alloying of morphology and solution condition, through to the mechanical alloying Fe50Cu50 after composite powder on scanning electron microscopy (sem) and distribution analysis has determined its morphology and Fe Cu and the solution conditions. The experimental results show that the ball mill 50 h, Fe50Cu50 composite powder particle size basically stable, size in a few microns or so, and Fe and Cu has fully fuses in together to form the uniform solid solution.