吉林师范大学学报(自然科学版)
吉林師範大學學報(自然科學版)
길림사범대학학보(자연과학판)
JILIN NORMAL UNIVERSITY JOURNAL(NATURAL SCIENCE EDITION)
2013年
2期
62-64,70
,共4页
刘洁%于万秋%王丽丽%左斌%赵立猛%华中
劉潔%于萬鞦%王麗麗%左斌%趙立猛%華中
류길%우만추%왕려려%좌빈%조립맹%화중
晶化过程%磁性能%巨磁阻抗效应
晶化過程%磁性能%巨磁阻抗效應
정화과정%자성능%거자조항효응
采用单辊快淬法制备Fe78Co2Zr8 Nb2 B9 Cu1非晶合金薄带,在不同热处理条件下对合金进行热处理.利用X射线衍射仪(XRD)、振动样品磁强计(VSM)和阻抗分析仪研究合金的晶化过程、磁性能及巨磁阻抗效应.结果表明:Fe78 Co2Zr8 Nb2 B9 Cu1非晶合金分别在550、600和650℃经不同保温时间退火后,α-Fe (Co)衍射峰强度均随保温时间的延长而增强.不同温度退火合金的比饱和磁化强度M,均随保温时间的延长而增大;矫顽力Hc随保温时间的变化比较复杂.通过不同保温时间退火使合金获得最大巨磁阻抗效应的过程中存在一个最佳保温时间.600C保温60 min退火后的Fe78 Co2 Zr8 Nb2B9 Cu1合金薄带GMI最佳,高达181.4%.
採用單輥快淬法製備Fe78Co2Zr8 Nb2 B9 Cu1非晶閤金薄帶,在不同熱處理條件下對閤金進行熱處理.利用X射線衍射儀(XRD)、振動樣品磁彊計(VSM)和阻抗分析儀研究閤金的晶化過程、磁性能及巨磁阻抗效應.結果錶明:Fe78 Co2Zr8 Nb2 B9 Cu1非晶閤金分彆在550、600和650℃經不同保溫時間退火後,α-Fe (Co)衍射峰彊度均隨保溫時間的延長而增彊.不同溫度退火閤金的比飽和磁化彊度M,均隨保溫時間的延長而增大;矯頑力Hc隨保溫時間的變化比較複雜.通過不同保溫時間退火使閤金穫得最大巨磁阻抗效應的過程中存在一箇最佳保溫時間.600C保溫60 min退火後的Fe78 Co2 Zr8 Nb2B9 Cu1閤金薄帶GMI最佳,高達181.4%.
채용단곤쾌쉬법제비Fe78Co2Zr8 Nb2 B9 Cu1비정합금박대,재불동열처리조건하대합금진행열처리.이용X사선연사의(XRD)、진동양품자강계(VSM)화조항분석의연구합금적정화과정、자성능급거자조항효응.결과표명:Fe78 Co2Zr8 Nb2 B9 Cu1비정합금분별재550、600화650℃경불동보온시간퇴화후,α-Fe (Co)연사봉강도균수보온시간적연장이증강.불동온도퇴화합금적비포화자화강도M,균수보온시간적연장이증대;교완력Hc수보온시간적변화비교복잡.통과불동보온시간퇴화사합금획득최대거자조항효응적과정중존재일개최가보온시간.600C보온60 min퇴화후적Fe78 Co2 Zr8 Nb2B9 Cu1합금박대GMI최가,고체181.4%.