电焊机
電銲機
전한궤
ELECTRIC WELDING MACHINE
2013年
4期
88-89,92
,共3页
何智勇%高瑞全%刘胜龙%韩晓辉
何智勇%高瑞全%劉勝龍%韓曉輝
하지용%고서전%류성룡%한효휘
国产化不锈钢%残余应力%焊接变形
國產化不鏽鋼%殘餘應力%銲接變形
국산화불수강%잔여응력%한접변형
通过对国产化不锈钢材料在不锈钢轨道车辆侧墙部件应用制造工艺过程中产生的变形进行数值模拟、跟踪测量和工艺控制,分析结构因素和工艺因素对侧墙残余变形的影响规律,掌握其焊接变形趋势,提出控制变形的工艺措施,以提高轨道车辆制造尺寸精度,减少侧墙变形的调修量,改善无涂装不锈钢车体的外观商品化水平.
通過對國產化不鏽鋼材料在不鏽鋼軌道車輛側牆部件應用製造工藝過程中產生的變形進行數值模擬、跟蹤測量和工藝控製,分析結構因素和工藝因素對側牆殘餘變形的影響規律,掌握其銲接變形趨勢,提齣控製變形的工藝措施,以提高軌道車輛製造呎吋精度,減少側牆變形的調脩量,改善無塗裝不鏽鋼車體的外觀商品化水平.
통과대국산화불수강재료재불수강궤도차량측장부건응용제조공예과정중산생적변형진행수치모의、근종측량화공예공제,분석결구인소화공예인소대측장잔여변형적영향규률,장악기한접변형추세,제출공제변형적공예조시,이제고궤도차량제조척촌정도,감소측장변형적조수량,개선무도장불수강차체적외관상품화수평.