塑性工程学报
塑性工程學報
소성공정학보
JOURNAL OF PLASTICITY ENGINEERING
2013年
1期
84-88
,共5页
谢磊磊%唐荻%江海涛%段晓鸽%刘胜
謝磊磊%唐荻%江海濤%段曉鴿%劉勝
사뢰뢰%당적%강해도%단효합%류성
汽车轻量化%先进高强钢%成形性能
汽車輕量化%先進高彊鋼%成形性能
기차경양화%선진고강강%성형성능
通过试验,对汽车用先进高强钢DP590、DP780、TRIP590的力学性能、微观金相组织、成形极限图进行研究,并与超深冲钢DC01成形极限进行对比.运用成形极限预测近似公式,对DP590、DP780、TRIP590、DC01的成形极限曲线进行预测,并与实测曲线进行对比.结果表明,DP钢和TRIP钢都具有较高的强度和良好的塑性,并具有较低的屈强比,能有效避免成形时局部颈缩和断裂.同时,DP钢和TRIP钢均具有良好的成形性能,DP590、TRIP590的成形能力甚至优于超深冲钢DC01.成形极限预测经验近似公式能很好的适用于DP590、DP780、TRIP590的成形极限预测,误差在2%以内,但对于DC01的成形极限预测误差则稍微偏大,约为4%.
通過試驗,對汽車用先進高彊鋼DP590、DP780、TRIP590的力學性能、微觀金相組織、成形極限圖進行研究,併與超深遲鋼DC01成形極限進行對比.運用成形極限預測近似公式,對DP590、DP780、TRIP590、DC01的成形極限麯線進行預測,併與實測麯線進行對比.結果錶明,DP鋼和TRIP鋼都具有較高的彊度和良好的塑性,併具有較低的屈彊比,能有效避免成形時跼部頸縮和斷裂.同時,DP鋼和TRIP鋼均具有良好的成形性能,DP590、TRIP590的成形能力甚至優于超深遲鋼DC01.成形極限預測經驗近似公式能很好的適用于DP590、DP780、TRIP590的成形極限預測,誤差在2%以內,但對于DC01的成形極限預測誤差則稍微偏大,約為4%.
통과시험,대기차용선진고강강DP590、DP780、TRIP590적역학성능、미관금상조직、성형겁한도진행연구,병여초심충강DC01성형겁한진행대비.운용성형겁한예측근사공식,대DP590、DP780、TRIP590、DC01적성형겁한곡선진행예측,병여실측곡선진행대비.결과표명,DP강화TRIP강도구유교고적강도화량호적소성,병구유교저적굴강비,능유효피면성형시국부경축화단렬.동시,DP강화TRIP강균구유량호적성형성능,DP590、TRIP590적성형능력심지우우초심충강DC01.성형겁한예측경험근사공식능흔호적괄용우DP590、DP780、TRIP590적성형겁한예측,오차재2%이내,단대우DC01적성형겁한예측오차칙초미편대,약위4%.