聚酯工业
聚酯工業
취지공업
POLYESTER INDUSTRY
2013年
1期
24-26
,共3页
PET FDY%直接纺丝%双头纺
PET FDY%直接紡絲%雙頭紡
PET FDY%직접방사%쌍두방
采用特性黏度为0.645dL/g的半消光PET熔体直接纺丝、利用双头纺工艺生产2~60 dtex/72 f涤纶FDY.结果表明,采用喷丝板孔径为0.20 mm,长径比为2.8,无风区高度80 mm,油嘴上油,纺丝温度289℃,环吹风风压40 Pa,拉伸温度91~93℃,拉伸倍数2.2 ~2.4,卷绕速度4 300m/min,生产的涤纶FDY条干不匀率为1.35%,沸水收缩率7%,产品染色均匀度大于4级,利用双头纺工艺产能增了1倍.
採用特性黏度為0.645dL/g的半消光PET鎔體直接紡絲、利用雙頭紡工藝生產2~60 dtex/72 f滌綸FDY.結果錶明,採用噴絲闆孔徑為0.20 mm,長徑比為2.8,無風區高度80 mm,油嘴上油,紡絲溫度289℃,環吹風風壓40 Pa,拉伸溫度91~93℃,拉伸倍數2.2 ~2.4,捲繞速度4 300m/min,生產的滌綸FDY條榦不勻率為1.35%,沸水收縮率7%,產品染色均勻度大于4級,利用雙頭紡工藝產能增瞭1倍.
채용특성점도위0.645dL/g적반소광PET용체직접방사、이용쌍두방공예생산2~60 dtex/72 f조륜FDY.결과표명,채용분사판공경위0.20 mm,장경비위2.8,무풍구고도80 mm,유취상유,방사온도289℃,배취풍풍압40 Pa,랍신온도91~93℃,랍신배수2.2 ~2.4,권요속도4 300m/min,생산적조륜FDY조간불균솔위1.35%,비수수축솔7%,산품염색균균도대우4급,이용쌍두방공예산능증료1배.