电加工与模具
電加工與模具
전가공여모구
ELECTROMACHINING & MOULD
2013年
5期
18-20,26
,共4页
郭豫鹏%宋云龙%韦东波%狄士春
郭豫鵬%宋雲龍%韋東波%狄士春
곽예붕%송운룡%위동파%적사춘
电火花铣削%焊缝处理%铝合金焊缝
電火花鐉削%銲縫處理%鋁閤金銲縫
전화화선삭%한봉처리%려합금한봉
EDM-milling%welding handling process%aluminum alloy welding joint
以铝合金焊缝的电火花铣削工艺为研究对象,利用电火花铣削技术对铝合金焊缝凸起进行了处理,并与经砂轮磨削处理的焊缝进行了力学性能、表面形貌、尺寸精度的对比,最后对电火花铣削铝合金焊缝的加工效率进行了研究。结果表明:铣削工艺影响焊缝力学性能,电火花铣削工艺与砂轮磨削工艺处理的焊缝抗拉性能相当;砂轮磨削焊缝表面为各向异性划痕沟槽式分布,电火花铣削焊缝表面为各向同性较均匀凹坑;同等尺寸要求下,电火花铣削工艺的尺寸精度高于砂轮磨削。
以鋁閤金銲縫的電火花鐉削工藝為研究對象,利用電火花鐉削技術對鋁閤金銲縫凸起進行瞭處理,併與經砂輪磨削處理的銲縫進行瞭力學性能、錶麵形貌、呎吋精度的對比,最後對電火花鐉削鋁閤金銲縫的加工效率進行瞭研究。結果錶明:鐉削工藝影響銲縫力學性能,電火花鐉削工藝與砂輪磨削工藝處理的銲縫抗拉性能相噹;砂輪磨削銲縫錶麵為各嚮異性劃痕溝槽式分佈,電火花鐉削銲縫錶麵為各嚮同性較均勻凹坑;同等呎吋要求下,電火花鐉削工藝的呎吋精度高于砂輪磨削。
이려합금한봉적전화화선삭공예위연구대상,이용전화화선삭기술대려합금한봉철기진행료처리,병여경사륜마삭처리적한봉진행료역학성능、표면형모、척촌정도적대비,최후대전화화선삭려합금한봉적가공효솔진행료연구。결과표명:선삭공예영향한봉역학성능,전화화선삭공예여사륜마삭공예처리적한봉항랍성능상당;사륜마삭한봉표면위각향이성화흔구조식분포,전화화선삭한봉표면위각향동성교균균요갱;동등척촌요구하,전화화선삭공예적척촌정도고우사륜마삭。
Based on the technology of electrical discharge machining milling (EDM-milling), the welding joint protruberances are treated with EDM-milling. The welding joints by EMD-milling are compared with those by grinding milling, in mechanical praperties, surface morphology, dimentional accuracy. At last, the processing efficiency of EDM-milling on aluminum alloy welding joints is researched. The results show that milling processes effected mechanical properties of welding joints, the EDM-milling process and grinding milling process is similar on tensile properties of welding joints. The surface of welding joints grinded appear that aluminum alloy have some anisotroic scratch groove distribution type, while the surface treated with EDM -milling is morphology for anisotropic homogeneous dimples. Under the same size, the size precision with EDM-milling is better than with grinding milling.