中国有色金属学报(英文版)
中國有色金屬學報(英文版)
중국유색금속학보(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2013年
10期
3027-3032
,共6页
戴世娟%王煜%陈锋%余新泉%张友法
戴世娟%王煜%陳鋒%餘新泉%張友法
대세연%왕욱%진봉%여신천%장우법
钛合金%d-电子合金设计理论%JMatPro软件%弹性模量%强度
鈦閤金%d-電子閤金設計理論%JMatPro軟件%彈性模量%彊度
태합금%d-전자합금설계이론%JMatPro연건%탄성모량%강도
titanium alloy%d-electron alloy design theory%JMatPro software%elastic modulus%strength
基于d-电子合金设计理论和JMatPro软件,运用正交试验,设计了具有较低弹性模量和较高强度且含有无毒元素Nb、Mo、Zr 和 Sn的新型生物医用β钛合金Ti?35Nb?4Sn?6Mo?9Zr,并对该合金的显微组织和力学性能进行分析。结果表明,Ti?35Nb?4Sn?6Mo?9Zr 合金在800°C 下固溶处理后,由单一的β等轴晶构成。与Ti?6Al?4V相比,该合金具有较优越的力学性能:E=65 GPa,σb=834 MPa,σ0.2=802 MPa,δ=11%,有望成为新型种植材料。该方法可以有效地降低实验次数,并得到理想的实验结果。
基于d-電子閤金設計理論和JMatPro軟件,運用正交試驗,設計瞭具有較低彈性模量和較高彊度且含有無毒元素Nb、Mo、Zr 和 Sn的新型生物醫用β鈦閤金Ti?35Nb?4Sn?6Mo?9Zr,併對該閤金的顯微組織和力學性能進行分析。結果錶明,Ti?35Nb?4Sn?6Mo?9Zr 閤金在800°C 下固溶處理後,由單一的β等軸晶構成。與Ti?6Al?4V相比,該閤金具有較優越的力學性能:E=65 GPa,σb=834 MPa,σ0.2=802 MPa,δ=11%,有望成為新型種植材料。該方法可以有效地降低實驗次數,併得到理想的實驗結果。
기우d-전자합금설계이론화JMatPro연건,운용정교시험,설계료구유교저탄성모량화교고강도차함유무독원소Nb、Mo、Zr 화 Sn적신형생물의용β태합금Ti?35Nb?4Sn?6Mo?9Zr,병대해합금적현미조직화역학성능진행분석。결과표명,Ti?35Nb?4Sn?6Mo?9Zr 합금재800°C 하고용처리후,유단일적β등축정구성。여Ti?6Al?4V상비,해합금구유교우월적역학성능:E=65 GPa,σb=834 MPa,σ0.2=802 MPa,δ=11%,유망성위신형충식재료。해방법가이유효지강저실험차수,병득도이상적실험결과。
A new kind ofβbiomedical titanium alloy, Ti?35Nb?4Sn?6Mo?9Zr, composed of non-toxic elements Nb, Mo, Zr and Sn with lower elastic modulus and higher strength was designed based on d-electron alloy design theory and JMatPro software using orthogonal experiment. The microstructure and basic mechanical properties of designed alloy were investigated. The results show that the alloy is composed of singleβequiaxed grains after solution treatment at 800 °C. Compared with Ti?6Al?4V, the mechanical properties of the designed alloy are more excellent: E=65 GPa, σb=834 MPa, σ0.2=802 MPa, and δ=11%, which is expected to become a promising new type implanted material. The research approach adopted can reduce the experimental time and cost effectively, and get the ideal experimental results.