CAJ | 학술논문

基于虚拟软件LabVIEW平台,选用ABB Tmax T2N160型号塑壳断路器作为试验对象,采用短接塑壳断路器的三相触点方法,开发了基于LabVIEW软件的短路电流分断能力的测试系统.三相瞬间采集波形表明测试系统是可行的;尖峰检测结果表明系统能在短路情况下及时进行分断;另外,系统可通过远程上位机进行远程控制并由虚拟软件记录相关数据,能实现批量、自动和精准的检测,有较高的实用价值.
기우허의연건LabVIEW평태,선용ABB Tmax T2N160형호소각단로기작위시험대상,채용단접소각단로기적삼상촉점방법,개발료기우LabVIEW연건적단로전류분단능력적측시계통.삼상순간채집파형표명측시계통시가행적;첨봉검측결과표명계통능재단로정황하급시진행분단;령외,계통가통과원정상위궤진행원정공제병유허의연건기록상관수거,능실현비량、자동화정준적검측,유교고적실용개치.
By using the ABB Tmax T2N160 molded case circuit breaker as the test object and adopting the three-phase contact method for short connected molded case circuit breaker,a testing system based on the virtual LabVIEW platform is constructed for short circuit breaking capacity.The three-phase instantaneous acquisition waveform indicates the testing system is feasible;spikes detection results show that the system can timely segment under short circuit conditions;in addition,the system can conduct remote control through remote host control,record related data using virtual software and realize batch,automatic and accurate detection and is therefore of high practical value.