塑料助剂
塑料助劑
소료조제
PLASTIC ADDITIVES
2012年
3期
28-32
,共5页
潘月%郝秋芬%苗燕%陈力%唐林生
潘月%郝鞦芬%苗燕%陳力%唐林生
반월%학추분%묘연%진력%당림생
乙酰柠檬酸三丁酯%柠檬酸%正丁醇%乙酸酐合成
乙酰檸檬痠三丁酯%檸檬痠%正丁醇%乙痠酐閤成
을선저몽산삼정지%저몽산%정정순%을산항합성
acetyl tributyl citrate%citric acid%n-butyl alcohol%acetic anhydride%synthesis
以柠檬酸、正丁醇和乙酸酐为原料,对甲苯磺酸为催化剂,通过酯化、脱醇、乙酰化、脱乙酸和乙酸酐、中和、水洗等步骤制备了乙酰柠檬酸三丁酯。和文献报道的工艺相比,节省了催化剂用量,减少了近一半的废水量。当反应物摩尔比n(柠檬酸):n(正丁醇):n(乙酸酐):n(对甲苯磺酸)=1:4.3:1.10:0.041,酯化反应温度为130-140℃,酯化时间为4h,乙酰化反应温度为50℃,乙酰化反应时间为1h时,产品的产率为97.5%,酯含量为99.21%,酸值为0.14mgKOH/g,色度小于50(Pt—Co),符合产品质量要求。
以檸檬痠、正丁醇和乙痠酐為原料,對甲苯磺痠為催化劑,通過酯化、脫醇、乙酰化、脫乙痠和乙痠酐、中和、水洗等步驟製備瞭乙酰檸檬痠三丁酯。和文獻報道的工藝相比,節省瞭催化劑用量,減少瞭近一半的廢水量。噹反應物摩爾比n(檸檬痠):n(正丁醇):n(乙痠酐):n(對甲苯磺痠)=1:4.3:1.10:0.041,酯化反應溫度為130-140℃,酯化時間為4h,乙酰化反應溫度為50℃,乙酰化反應時間為1h時,產品的產率為97.5%,酯含量為99.21%,痠值為0.14mgKOH/g,色度小于50(Pt—Co),符閤產品質量要求。
이저몽산、정정순화을산항위원료,대갑분광산위최화제,통과지화、탈순、을선화、탈을산화을산항、중화、수세등보취제비료을선저몽산삼정지。화문헌보도적공예상비,절성료최화제용량,감소료근일반적폐수량。당반응물마이비n(저몽산):n(정정순):n(을산항):n(대갑분광산)=1:4.3:1.10:0.041,지화반응온도위130-140℃,지화시간위4h,을선화반응온도위50℃,을선화반응시간위1h시,산품적산솔위97.5%,지함량위99.21%,산치위0.14mgKOH/g,색도소우50(Pt—Co),부합산품질량요구。
Acetyl tributyl citrate was synthesized by used citric acid, n-butanol and acetic anhydride as reactants, p-toluenesulfonie acid as catalyst, through esterification, alcohol removal, aeetylation, acetic acid and acetic anhydride removal, neutralization and water washing. Compared with one reported in the literature, the volume of wastewater dropped to about half of it and catalyst saved also. When the mole ratio of reactants are n(citric aeid):n(n-butanol):n(aeetic anhydride):n(p-toluenesulfonie acid) = 1:4.3:1.10:0.041, the esterifica- tion reaction for 4h at 130-140℃, the acetylation reaction for 1 h at 50℃, the product yield is 97.5%, the ester content is 99.21%, acid value is 0.14 mg KOH/g and the colourity is less than 50(Pt-Co), which meet the requirements of the product quality.