硫酸工业
硫痠工業
류산공업
SULPHURIC ACID INDUSTRY
2012年
3期
17-20
,共4页
杨姝%童华%王京刚%刘兆斌
楊姝%童華%王京剛%劉兆斌
양주%동화%왕경강%류조빈
烟气脱硫%氧化锌%反应活性%吸收率
煙氣脫硫%氧化鋅%反應活性%吸收率
연기탈류%양화자%반응활성%흡수솔
flue gas desulphurization%zinc oxide%reactivity%absorption rate
以氧化锌为吸收剂的烟气脱硫工艺能实现硫、锌资源的回收利用,特别适合于铅锌冶炼行业的烟气净化。试验研究了氧化锌与SO2在水溶液中的反应过程。通过固、液相中亚硫酸盐含量,锌离子浓度以及溶液pH值等对反应过程进行了表征,考察了SO2浓度、温度对反应的影响。试验结果表明,SO2在水溶液中首先是与氧化锌反应生成固体亚硫酸锌,然后固体亚硫酸锌溶解进入液相。当SO2水溶液训(SO2)1%以上时,25~35℃的反应温度对于提高SO2吸收率有利,进一步的表观反应活化能分析表明,氧化锌和SO2水溶液的反应活性与Ca(OH)2和SO2水溶液的反应活性相似。
以氧化鋅為吸收劑的煙氣脫硫工藝能實現硫、鋅資源的迴收利用,特彆適閤于鉛鋅冶煉行業的煙氣淨化。試驗研究瞭氧化鋅與SO2在水溶液中的反應過程。通過固、液相中亞硫痠鹽含量,鋅離子濃度以及溶液pH值等對反應過程進行瞭錶徵,攷察瞭SO2濃度、溫度對反應的影響。試驗結果錶明,SO2在水溶液中首先是與氧化鋅反應生成固體亞硫痠鋅,然後固體亞硫痠鋅溶解進入液相。噹SO2水溶液訓(SO2)1%以上時,25~35℃的反應溫度對于提高SO2吸收率有利,進一步的錶觀反應活化能分析錶明,氧化鋅和SO2水溶液的反應活性與Ca(OH)2和SO2水溶液的反應活性相似。
이양화자위흡수제적연기탈류공예능실현류、자자원적회수이용,특별괄합우연자야련행업적연기정화。시험연구료양화자여SO2재수용액중적반응과정。통과고、액상중아류산염함량,자리자농도이급용액pH치등대반응과정진행료표정,고찰료SO2농도、온도대반응적영향。시험결과표명,SO2재수용액중수선시여양화자반응생성고체아류산자,연후고체아류산자용해진입액상。당SO2수용액훈(SO2)1%이상시,25~35℃적반응온도대우제고SO2흡수솔유리,진일보적표관반응활화능분석표명,양화자화SO2수용액적반응활성여Ca(OH)2화SO2수용액적반응활성상사。
The recycling of sulphur and zinc can be realized by a process using zinc oxide as the absorbent, which is especially suitable for flue gas desulphurization in lead-zinc metallurgical industry. The reaction of zinc oxide with SO2 in aqueous solution was studied in laboratory. The sulphite content in solid and solution, Zn2~ concentration and pH of solution were used to characterize the reaction and the effects of SO2 concentration and temperature on reaction were examined. The results showed that S02 in aqueous solution first reacted with zinc oxide to form zinc sulphite solid, which then dissolved in aqueous solution. At the SO2 concentration of above 1% wt, the temperature of 25 - 35 ℃ was favorable for SO2 conversion. The further analysis of apparent activation energy showed that the reactivity of zinc oxide with SO2 in solution was similar to that of Ca(OH) 2.