山东国土资源
山東國土資源
산동국토자원
LAND AND RESOURCES IN SHANGDONG PROVINCE
2012年
5期
33-36
,共4页
王卿%回寒星%周长祥%姜云%吕学琴%刘耀华
王卿%迴寒星%週長祥%薑雲%呂學琴%劉耀華
왕경%회한성%주장상%강운%려학금%류요화
电感耦和等离子体发射光谱法%Y-内标%钛铁矿
電感耦和等離子體髮射光譜法%Y-內標%鈦鐵礦
전감우화등리자체발사광보법%Y-내표%태철광
Inductively coupled plasma- atomic emission spectrometry%Y- internal standard%ilmenite
采用HCl-HNO3-HF-H2SO4溶矿,利用电感耦合等离子体发射光谱仪内标法(ICP—AES)测定,建立了钛铁矿、钒钛磁铁矿中铜、钴、镍、锰、钒、铬等元素的同时测定方法。对电感耦合等离子体发射光谱仪测定的最佳仪器条件及分析谱线进行了选择,并对钛、铁基体的影响以及采用Y内标元素消除基体的影响进行了研究。实验结果表明:采用内标法能够消除基体对被测元素的影响,改善分析准确度和精密度,与经典分光光度法和原子吸收法相比较,具有检出限低、灵敏度高,操作简便、快速等突出优点。方法经国家一级钒钛磁铁矿标准物质验证,测定值与标准值吻合。
採用HCl-HNO3-HF-H2SO4溶礦,利用電感耦閤等離子體髮射光譜儀內標法(ICP—AES)測定,建立瞭鈦鐵礦、釩鈦磁鐵礦中銅、鈷、鎳、錳、釩、鉻等元素的同時測定方法。對電感耦閤等離子體髮射光譜儀測定的最佳儀器條件及分析譜線進行瞭選擇,併對鈦、鐵基體的影響以及採用Y內標元素消除基體的影響進行瞭研究。實驗結果錶明:採用內標法能夠消除基體對被測元素的影響,改善分析準確度和精密度,與經典分光光度法和原子吸收法相比較,具有檢齣限低、靈敏度高,操作簡便、快速等突齣優點。方法經國傢一級釩鈦磁鐵礦標準物質驗證,測定值與標準值吻閤。
채용HCl-HNO3-HF-H2SO4용광,이용전감우합등리자체발사광보의내표법(ICP—AES)측정,건립료태철광、범태자철광중동、고、얼、맹、범、락등원소적동시측정방법。대전감우합등리자체발사광보의측정적최가의기조건급분석보선진행료선택,병대태、철기체적영향이급채용Y내표원소소제기체적영향진행료연구。실험결과표명:채용내표법능구소제기체대피측원소적영향,개선분석준학도화정밀도,여경전분광광도법화원자흡수법상비교,구유검출한저、령민도고,조작간편、쾌속등돌출우점。방법경국가일급범태자철광표준물질험증,측정치여표준치문합。
By using HCL - H2 NO3 - HF - H2 SO4 to melt ore, using Y - internal standard by inductively cou- pled plasma - atomic emission spectrometry(ICP - AES) method, the method for determining Cu, Co, Ni, V and Cr in ilmenite and vanadium and titanium magnetite at the same time has been set up. The amount of fluxes, detecting lines and instrument working parameters have been selected, the matrix effects of titani- um and iron, and the method for eliminating the influence of matrix by using Y- internal standard have been studied in this paper. It is showed that Y -internal standard can eliminate the influence of matrix on the detection, and the accuracy and precision of analysis results can be improved as well. Compared with classic spectrophotometry and atomic absorption spectrometry, this method has the advanges of lower de- tection limits, higher sensitivity, simpler and faster operation. Tested by National Standard Reference Ma- terials, the determination values are in good agreement with certified values .